Characterization of Aluminium Single-Lap Joints for High Temperature Applications

• Tipo: Artigo em Livro de Atas de Conferência Internacional
• Data: 2013

Autores

Mariana D Banea (Autor) FEUP; Lucas F M da Silva (Autor) FEUP; Raul D S G Campilho (Autor) Outra; Abilio M P de Jesus (Autor) Outra

Ata de Conferência Internacional

Título: ADVANCED MATERIALS FORUM VI, PTS 1 AND 2

Páginas: 721-726

6th International Materials Symposium (MATERIALS 2011)/15th Meeting of SPM

Guimaraes, PORTUGAL, APR 18-20, 2011

Indexação

ISI Web of Knowledge - 1 Citação

Scopus - 4 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia dos materiais

Outras Informações

ID Authenticus: P-005-3PR

DOI: 10.4028/www.scientific.net/msf.730-732.721

Abstract (EN): In this study, an experimental investigation into the shear strength behaviour of aluminium alloy single-lap adhesive joints was carried out in order to understand the effect of temperature on the strength of adhesively bonding joints. Single lap joints (SLJs) were fabricated and tested at RT and high temperatures (100 degrees C, 125 degrees C, 150 degrees C, 175 degrees C and 200 degrees C). Results showed that the failure loads of the single-lap joint test specimens vary with temperature and this needs to be considered in any design procedure. It is shown that, although the tensile stress decreased with temperature, the lap-shear strength of the adhesive increased with increasing of temperature up to the glass transition of the adhesive (T-g) and decreased for tests above the T-g.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 6