Photo-oxidation of cork manufacturing wastewater

• Tipo: Artigo em Revista Científica Internacional
• Data: 2004

Autores

Carla A. Silva (Autor) Outra; Luís M. Madeira (Autor) FEUP; Rui A. Boaventura (Autor) FEUP; Carlos A. Costa (Autor) FEUP

Revista

Título: Chemosphere

Vol. 55 Nº 1

Páginas: 19-26

ISSN: 0045-6535

Editora: Elsevier

Indexação

ISI Web of Knowledge - 29 Citações

ISI Web of Science

Scopus - 27 Citações

COMPENDEX

Outras Informações

ID Authenticus: P-000-AWS

DOI: 10.1016/j.chemosphere.2003.11.018

Abstract (EN): Several photo-activated processes have been investigated for oxidation of a cork manufacturing wastewater. A comparative activity study is made between different homogeneous (H2O2/UV-Vis and H2O2/Fe2+/UV-Vis) and heterogeneous (TiO2/UV-Vis and TiO2/H2O2/UV-ViS) systems, with degradation performances being evaluated in terms of total organic carbon (TOC) removal. Results obtained in a batch photo-reactor show that photo-catalysis with TiO2 is not suitable for this kind of wastewater while the H2O2/UV-Vis oxidation process, for which the effect of some operating conditions was investigated, allows to remove 39% of TOC after 4 h of operation (for C-H2O2 = 0.59 M, pH = 10 and T = 35 degreesC). The combined photo-activated process, i.e., using both TiO2 and H2O2, yields an overall TOC decrease of 46% (for C-TiO2 = 1.0 g l(-1)). The photo-Fenton process proved to be the most efficient, proceeds at a much higher oxidation rate and allows to achieve 66% mineralization in just 10 min of reaction time (for C-H2O2 = 0.31 M, T = 30 degreesC, Fe2+ :H2O2 = 0.12 (mol) and pH = 3.2).

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 8