Thermal, Mechanical and Chemical Analysis of Poly(vinyl alcohol) Multifilament and Braided Yarns

• Tipo: Artigo em Revista Científica Internacional
• Data: 2021

Autores

de Moura, MFSF (Autor) FEUP; TF Freire (Autor) Outra; T Quinaz (Autor) Outra; A Ferturzinhos (Autor) Outra; NT Quyen (Autor) Outra; M Martins (Autor) Outra; A Zille (Autor) Outra; N Dourado (Autor) Outra

Revista

Título: Polymers

Vol. 13

Página Final: 3644

Editora: MDPI

Indexação

ISI Web of Knowledge - 0 Citações

Scopus - 0 Citações

Classificação Científica

CORDIS: Ciências Tecnológicas > Engenharia > Engenharia mecânica

FOS: Ciências da engenharia e tecnologias > Engenharia mecânica

Outras Informações

ID Authenticus: P-00V-M9R

DOI: 10.3390/polym13213644

Abstract (EN): Poly(vinyl alcohol) (PVA) in multifilament and braided yarns (BY) forms presents great potential for the design of numerous applications. However, such solutions fail to accomplish their requirements if the chemical and thermomechanical behaviour is not sufficiently known. Hence, a comprehensive characterisation of PVA multifilament and three BY architectures (6, 8, and 10 yarns) was performed involving the application of several techniques to evaluate the morphological, chemical, thermal, and mechanical features of those structures. Scanning electron microscopy (SEM) was used to reveal structural and morphological information. Differential thermal analysis (DTA) pointed out the glass transition temperature of PVA at 76 & DEG;C and the corresponding crystalline melting point at 210 & DEG;C. PVA BY exhibited higher tensile strength under monotonic quasi-static loading in comparison to their multifilament forms. Creep tests demonstrated that 6BY structures present the most deformable behaviour, while 8BY structures are the least deformable. Relaxation tests showed that 8BY architecture presents a more expressive variation of tensile stress, while 10BY offered the least. Dynamic mechanical analysis (DMA) revealed storage and loss moduli curves with similar transition peaks for the tested structures, except for the 10BY. Storage modulus is always four to six times higher than the loss modulus.</p>

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 21