Modeling the Calibration/Cooling Stage of Complex Thermoplastic Profiles

• Tipo: Artigo em Livro de Atas de Conferência Internacional
• Data: 2013

Autores

Ribau, AM (Autor) Outra; Goncalves, ND (Autor) Outra; Silva, C (Autor) Outra; Nobrega, JM (Autor) Outra; Carneiro, OS (Autor) Outra

Ata de Conferência Internacional

Título: ADVANCED MATERIALS FORUM VI, PTS 1 AND 2

Páginas: 537-542

6th International Materials Symposium (MATERIALS 2011)/15th Meeting of SPM

Guimaraes, PORTUGAL, APR 18-20, 2011

Indexação

ISI Web of Knowledge - 0 Citações

Scopus - 0 Citações

Outras Informações

ID Authenticus: P-005-3NZ

DOI: 10.4028/www.scientific.net/msf.730-732.537

Abstract (EN): Thermoplastics have very low thermal diffusivity, which is advantageous for some applications but create difficulties for their processing. In fact, in continuous processes, such as extrusion, it can limit the production rate, which is dependent on the installed cooling capability of the extrusion line, originates the development of considerable thermal gradients during the cooling stage and, consequently, the development of stresses that can be frozen in the product (generally referred as residual thermal stresses) that will affect negatively its mechanical performance in use. Therefore, the conditions in which the cooling stage takes place not only determine the production rate, but also the final properties of extruded products. Due to the large number of parameters influencing the cooling stage, its optimization requires the use of proper modelling codes. The work here presented is intended to improve the scope of application of an existing 3D non-isothermal multi-domain numerical code based on the finite volume method (FVM), through the implementation of unstructured meshes enabling, therefore, to predict the evolution of the thermal field during the cooling stage of the extrusion of complex profiles.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 6