Propyne hydrogenation in a continuous polymeric catalytic membrane reactor

• Tipo: Artigo em Revista Científica Internacional
• Data: 2007

Autores

Lúcia Brandão (Autor) FEUP; Luis Madeira (Autor) FEUP; Adélio Mendes (Autor) FEUP

Revista

Título: Chemical Engineering Science

Vol. 62 Nº 24

Páginas: 6768-6776

ISSN: 0009-2509

Editora: Elsevier

Indexação

ISI Web of Knowledge - 10 Citações

ISI Web of Science

Scopus - 12 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias

CORDIS: Ciências Tecnológicas > Engenharia > Engenharia química

Outras Informações

ID Authenticus: P-004-5WH

DOI: 10.1016/j.ces.2007.07.054

Abstract (EN): Propyne hydrogenation was studied in a continuous polymeric catalytic membrane reactor (pCMR), both experimentally and theoretically. It was used a poly(dimethylsiloxane) (PDMS) composite membrane with an average thickness of 4.4 mu m, loaded with 5 wt% of 9 nm diameter Pd clusters. The reaction was conducted at 308 K and several feed compositions at a fixed flow rate were tested. The mathematical model proposed includes the mass balances to the retentate and permeate chambers and the mass balance and transport kinetics through the catalytic membrane. The pCMR model also considers a reaction rate equation composed of two terms: the propyne to propylene and the propylene to propane hydrogenations. The selectivity between these two reactions is described by the bicomponent adsorption of propyne and propylene obtained by the IAST model (thermodynamic selectivity). The proposed model represents quite well the experimental data regarding the flow rates and mixture compositions of the permeate and retentate streams.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 9