Strap Repair Optimization by Using Embedded Patches

• Tipo: Artigo em Livro de Atas de Conferência Internacional
• Data: 2013

Autores

Pinto, AMG (Autor) Outra; Campilho, RDSG (Autor) Outra; Mendes, IR (Autor) Outra; Magalhaes, AG (Autor) Outra; Baptista, APM (Autor) FEUP

Ata de Conferência Internacional

Título: ADVANCED MATERIALS FORUM VI, PTS 1 AND 2

Páginas: 1036-1041

6th International Materials Symposium (MATERIALS 2011)/15th Meeting of SPM

Guimaraes, PORTUGAL, APR 18-20, 2011

Indexação

ISI Web of Knowledge - 0 Citações

Scopus - 0 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia dos materiais

Outras Informações

ID Authenticus: P-005-3QP

DOI: 10.4028/www.scientific.net/MSF.730-732.1036

Abstract (EN): Adhesively-bonded techniques offer an attractive option for repair of aluminium structures, and currently there are three widely used configurations, i.e., single-strap (SS), double-strap (DS) and scarf repairs. SS and DS repairs are straightforward to execute but stresses in the adhesive layer peak at the ends of the overlap. DS repairs additionally require both sides of the damaged structures to be reachable for repair, which is often not possible. In these repair configurations, some limitations emerge such as the weight, aerodynamic performance and aesthetics. The scarf repair is more complex to fabricate but stresses are more uniform along the adhesive bondline. Few studies of SS and DS repairs with embedded patches, such that these are completely flush with the adherends, are available in the literature. Furthermore, no data is available about the effects of geometrical and material parameters (e.g. the Young's modulus of adhesive, E) on the mechanical behaviour optimization of embedded repairs. For this purpose, in this work standard SS and DD repairs, and also with embedded patches in the adherends, were tested under tension to allow the geometry optimization, by varying the overlap length (L-O), thus allowing the maximization of the repairs strength. The influence of the patch embedding technique, showing notorious advantages such as aerodynamic or aesthetics, was compared in strength with standard strap repairs, for the viability analysis of its implementation. As a result of this work, some conclusions were drawn for the design optimization of bonded repairs on aluminium structures.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 6