Bonding dissimilar materials via adhesively bonded spot-welded joints: cohesive zone model technique

• Tipo: Artigo em Revista Científica Internacional
• Data: 2020

Autores

Paygozar, B (Autor) Outra; Dizaji, SA (Autor) Outra; da Silva, LFM (Autor) FEUP

Revista

Título: Journal of Adhesion Science and Technology

Vol. 34

Páginas: 2352-2363

ISSN: 0169-4243

Editora: Taylor & Francis

Indexação

ISI Web of Knowledge - 0 Citações

Scopus - 2 Citações

Outras Informações

ID Authenticus: P-00S-3ME

DOI: 10.1080/01694243.2020.1761043

Abstract (EN): This study investigates the single-strap joints (adhesively bonded spot-welded) under static loading. Experimental tensile tests are carried out to validate the numerical analyses. For this purpose, the specimens of dissimilar materials were prepared by joining them with a thin layer of a two-component epoxy-based adhesive at one side and spot welding at the other side. Then, they were tested under tensile-loading conditions. The numerical analyses were performed according to the cohesive zone model (CZM) to estimate the failure loads of the joints. The failure loades of the joints with different dimensions were studied to evaluate the conditions causing the cohesive failure of either the adhesive layer or the weld nugget. It is shown that with minor changes in the bondline and weld designs, the joining process of the dissimilar materials will be more feasible.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 12