Effect of temperature on the shear strength of aluminium single lap bonded joints for high temperature applications

• Tipo: Artigo em Revista Científica Internacional
• Data: 2014

Autores

Banea, MD (Autor) Outra; da Silva, LFM (Autor) FEUP; Campilho, RDSG (Autor) Outra

Revista

Título: Journal of Adhesion Science and Technology

Vol. 28

Páginas: 1367-1381

ISSN: 0169-4243

Editora: Taylor & Francis

Indexação

ISI Web of Knowledge - 26 Citações

Scopus - 48 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia química

Outras Informações

ID Authenticus: P-009-9T8

DOI: 10.1080/01694243.2012.697388

Abstract (EN): An experimental and numerical investigation into the shear strength behaviour of adhesive single lap joints (SLJs) was carried out in order to understand the effect of temperature on the joint strength. The adherend material used for the experimental tests was an aluminium alloy in the form of thin sheets, and the adhesive used was a high-strength high temperature epoxy. Tensile tests as a function of temperature were performed and numerical predictions based on the use of a bilinear cohesive damage model were obtained. It is shown that at temperatures below T-g, the lap shear strength of SLJs increased, while at temperatures above T-g, a drastic drop in the lap shear strength was observed. Comparison between the experimental and numerical maximum loads representing the strength of the joints shows a reasonably good agreement.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 15