Mode III interlaminar fracture of carbon/epoxy laminates using the edge crack torsion (ECT) test

• Tipo: Artigo em Revista Científica Internacional
• Data: 2009

Autores

A. B. de Morais (Autor) Outra; A. B. Pereira (Autor) Outra; M. F. S. F de Moura (Autor) FEUP; A. G. Magalhães (Autor) Outra

Revista

Título: Composites Science and Technology

Vol. 69 Nº 5

Páginas: 670-676

ISSN: 0266-3538

Editora: Elsevier

Indexação

ISI Web of Knowledge - 38 Citações

Scopus - 62 Citações

COMPENDEX

INSPEC

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia dos materiais

Outras Informações

ID Authenticus: P-003-M01

DOI: 10.1016/j.compscitech.2008.12.019

Abstract (EN): The mode III interlaminar fracture of carbon/epoxy laminates was evaluated with the edge crack torsion (ECT) test. Three-dimensional finite element analyses were performed in order to select two specimen geometries and an experimental data reduction scheme. Test results showed considerable non-linearity before the maximum load point and a significant R-curve effect. These features prevented an accurate definition of the initiation point. Nevertheless, analyses of non-linearity zones showed two likely initiation points corresponding to G(IIIc) values between 850 and 1100 J/m(2) for both specimen geometries. Although any of these values is realistic, the range is too broad, thus showing the limitations of the ECT test and the need for further research.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 7