Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Measuring the intralaminar crack resistance curve of fibre reinforced composites at extreme temperatures
Mapa das Instalações
Edifício Principal | Main Building Edifício Pós-Graduações | Post-Graduate Building

Measuring the intralaminar crack resistance curve of fibre reinforced composites at extreme temperatures

Título
Measuring the intralaminar crack resistance curve of fibre reinforced composites at extreme temperatures
Tipo
Artigo em Revista Científica Internacional
Ano
2016
Autores
Pinto, RF
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Catalanotti, G
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Camanho, PP
(Autor)
FEUP
Revista
Vol. 91
Páginas: 145-155
ISSN: 1359-835X
Editora: Elsevier
Indexação
Publicação em ISI Web of Knowledge ISI Web of Knowledge - 0 Citações
Publicação em Scopus Scopus - 0 Citações
Outras Informações
ID Authenticus: P-00M-4FF
Abstract (EN): This work focuses on the development of methods to measure the intralaminar fracture toughness of 1M7/8552 CFRP at extreme temperatures. The size effect law of scaled double-edge-notched (DEN) specimens is used to obtain the crack resistance curves associated with longitudinal failure of polymer composites. The compressive and tensile crack resistance curves are determined and compared to those measured at room temperature. Scanning electron microscopy is used to analyse the fracture surface of tensile DEN specimens as a means to understand the damage mechanisms involved and their dependence on temperature variations. It is shown that the methods proposed enable the measurement of the crack resistance curve under different environment conditions. The results obtained can be used in analytical models to evaluate the integrity of composite structures at extreme temperatures.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 11
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Thin-ply polymer composite materials: A review (2020)
Outra Publicação em Revista Científica Internacional
Arteiro, A; Furtado, C; Catalanotti, G; Linde, P; Camanho, PP
CompTest2008 (2009)
Outra Publicação em Revista Científica Internacional
Fabrice Pierron; Pedro Camanho; Michael R Wisnom
CompTest 2006 (2007)
Outra Publicação em Revista Científica Internacional
Pedro P Camanho
CompTest 2006 special issue (vol 38, pg 2382, 2007) (2007)
Outras Publicações
Pedro P Camanho
Tailoring for strength of composite steered-fibre panels with cutouts (2010)
Artigo em Revista Científica Internacional
Lopes, CS; Gurdal, Z; Camanho, PP

Ver todas (35)

Recomendar Página Voltar ao Topo
Copyright 1996-2024 © Faculdade de Economia da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z  I Livro de Visitas
Página gerada em: 2024-09-28 às 11:22:51 | Política de Utilização Aceitável | Política de Proteção de Dados Pessoais | Denúncias
SAMA2