Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > CorkSTF mu fluidics - A novel concept for the development of eco-friendly light-weight energy absorbing composites

CorkSTF mu fluidics - A novel concept for the development of eco-friendly light-weight energy absorbing composites

Título
CorkSTF mu fluidics - A novel concept for the development of eco-friendly light-weight energy absorbing composites
Tipo
Artigo em Revista Científica Internacional
Ano
2015
Autores
Martinez Aranda, S
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Título: Materials and DesignImportada do Authenticus Pesquisar Publicações da Revista
Vol. 82
Páginas: 326-334
ISSN: 0261-3069
Editora: Elsevier Science
Outras Informações
ID Authenticus: P-00G-39R
Abstract (EN): CorkSTF mu fluidics are environmentally friendly composites consisting of a laminar sheet of compacted micro-agglomerated cork engraved with a network of microchannels by laser and filled with a concentrated aqueous solution of cornstarch (shear thickening fluid). Thus the mechanical properties of these composites will result from the combination of the mechanical properties of the micro-agglomerated of cork and the enhanced shear thickening response of the STF flowing through the network of microchannels. In this work we have performed low velocity impact tests using a drop weight testing machine in order to asses the improvement of these composites with regards to the micro-agglomerated of cork alone. A numerical analysis was also performed and allowed to understand how shear thickening behavior is triggered by the appropriate combination microchannels' size and the inlet velocity. Thus, for the 60P/40S/M sample, the peak force was larger than the one given by the cork sheets without engraved microchannel nor STF.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 9
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Machines and control systems for friction stir welding: A review (2016)
Outra Publicação em Revista Científica Internacional
Mendes, N; Neto, P; Loureiro, A; António Paulo Moreira
Stress intensity factor and load transfer analysis of a cracked riveted lap joint (2007)
Artigo em Revista Científica Internacional
Moreira, PMGP; de Matos, PFP; Camanho, PP; Stefan D Pastrama; de Castro, PMST
Spinodal decomposition mechanism study on the duplex stainless steel UNS S31803 using ultrasonic speed measurements (2010)
Artigo em Revista Científica Internacional
Victor Hugo C. de Albuquerque; Edgard de Macedo Silva; Josinaldo Pereira Leite; Elineudo Pinho de Moura; Vera Lúcia de Araújo Freitas; João Manuel R.S. Tavares
Relationship of design features of stemmed tibial knee prosthesis with stress shielding and end-of-stem pain (2009)
Artigo em Revista Científica Internacional
A. Completo; P. Talaia; F. Fonseca; J. A. Simões
Methodologies for failure analysis: a critical survey (2004)
Artigo em Revista Científica Internacional
Paulo M. S. T. de Castro; António Fernandes

Ver todas (13)

Recomendar Página Voltar ao Topo
Copyright 1996-2024 © Faculdade de Arquitectura da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z  I Livro de Visitas
Página gerada em: 2024-10-05 às 21:32:44 | Política de Utilização Aceitável | Política de Proteção de Dados Pessoais | Denúncias