Temperature-Independent Multi-Parameter Measurement Based on a Tapered Bragg Fiber

• Tipo: Artigo em Revista Científica Internacional
• Data: 2016

Autores

Martins, TJM (Autor) Outra; marques, mb (Autor) FCUP; Roy, P (Autor) Outra; Jamier, R (Autor) Outra; Fevrier, S (Autor) Outra; Frazao, O (Autor) FCUP

Revista

Título: IEEE Photonics Technology Letters

Vol. 28

Páginas: 1565-1568

ISSN: 1041-1135

Editora: IEEE

Indexação

ISI Web of Knowledge - 8 Citações

Scopus - 7 Citações

Outras Informações

ID Authenticus: P-00K-G8V

DOI: 10.1109/lpt.2016.2555300

Abstract (EN): Temperature-independent strain and angle measurements are achieved resorting to a taper fabricated on a Bragg fiber using a CO2 laser. The characteristic bimodal interference of an untapered Bragg fiber is rendered multimode after taper fabrication and the resulting transmission spectra are analyzed as a function of strain, applied angle, and temperature variations. The intrinsic strain sensitivity exhibited by the Bragg fiber is increased 15 fold after tapering and reaches 22.68 pm/mu epsilon. The angle and temperature measurements are also performed with maximum sensitivities of 185.10 pm/deg and -12.20 pm/K, respectively. The difference in wavelength shift promoted by variations in strain, angle, and temperature for the two fringes studied is examined. Strain and angle sensing with little temperature sensitivity is achieved, presenting a response of 2.87 pm/mu epsilon and -57.31 pm/deg, respectively, for strain values up to 400 mu epsilon and angles up to 10 degrees. Simultaneous angle and strain measurements are demonstrated.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 4