A Photo-Thermoelectric Twist to Wireless Energy Transfer: Radial Flexible Thermoelectric Device Powered by a High-Power Laser Beam

• Tipo: Artigo em Revista Científica Internacional
• Data: 2023

Autores

Maia, M (Autor) Outra; Pires, AL (Autor) Outra; Rocha, M (Autor) Outra; Ferreira Teixeira, S (Autor) Outra; Robalinho, P (Autor) Outra; Frazao, O (Autor) FCUP; Furtado, C (Autor) Outra; Califórnia, A (Autor) Outra; Machado, V (Autor) Outra; Bogas, S (Autor) Outra; Ferreira, C (Autor) Outra; Machado, J (Autor) Outra; Sousa, L (Autor) Outra; Luis, UG (Autor) Outra; San Juan, AMG (Autor) Outra; Crespo, PO (Autor) Outra; Medina, FN (Autor) Outra; Sande, CU (Autor) Outra; Marino, AC (Autor) Outra; González, GR (Autor) Outra; Pereira, AT (Autor) Outra; Agelet, FA (Autor) Outra; Jamier, R (Autor) Outra; Roy, P (Autor) Outra; Leconte, B (Autor) Outra; Auguste, JL (Autor) Outra; pereira, a. m. (Autor) FCUP

Revista

Título: Advanced Materials Technologies

Vol. 8

Editora: Wiley-Blackwell

Indexação

ISI Web of Knowledge - 0 Citações

Scopus - 1 Citação

Outras Informações

ID Authenticus: P-00Y-M7P

DOI: 10.1002/admt.202202104

Abstract (EN): Systems for wireless energy transmission (WET) are gaining prominence nowadays. This work presents a WET system based on the photo-thermoelectric effect. With an incident laser beam at lambda = 1450 nm, a temperature gradient is generated in the radial flexible thermoelectric (TE) device, with a carbon-based light collector in its center to enhance the photoheating. The three-part prototype presents a unique approach by using a radial TE device with one simple manufacturing process - screen-printing. A TE ink with a polymeric matrix of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate and doped-Poly(vinyl alcohol) with Sb-Bi-Te microparticles is developed (S similar to 33 mu VK-1 and s similar to 10.31 Sm-1), presenting mechanical and electrical stability. Regarding the device, a full electrical analysis is performed, and the influence of the light collector is investigated using thermal tests, spectrophotometry, and numerical simulations. A maximum output voltage (Vout) of similar to 16 mV and maximum power density of similar to 25 mu Wm(-2) are achieved with Plaser = 2 W. Moreover, the device's viability under extreme conditions is explored. At T similar to 180 K, a 25% increase in Vout compared to room-temperature conditions is achieved, and at low pressures (similar to 10(-6) Torr), an increase of 230% is obtained. Overall, this prototype allows the supply of energy at long distances and remote places, especially for space exploration.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 13