Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > The IGBT Transistor switching. A case study

The IGBT Transistor switching. A case study

Título
The IGBT Transistor switching. A case study
Tipo
Artigo em Livro de Atas de Conferência Internacional
Ano
1994
Autores
Armando Araújo
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
António Quintas
(Autor)
FEUP
Adriano Carvalho
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
António Pina Martins
(Autor)
FEUP
Ata de Conferência Internacional
Outras Informações
Resumo (PT): The paper presents the design, implementation, active protection against fault conditions and test results of a drive circuit for IGBT¿s based static switches. Careful focus is concentrated on developing a drive qualified for protecting the switch in fault conditions, for controlling switching times in PWM inverter applications, for minimising noise effects of high frequency switching and not requiring any additional floating power supply, by using control signal modulated at high frequency and memory effect of the switch input. The main characteristics of the drive are requirements to an industrial application - the control of the drying and oil filling processing in the power distribution transformers industry. This application is based on a 100 kVA low frequency inverter implemented with IGBT transistors, 300 A, 1000 V.
Abstract (EN): The paper presents the design, implementation, active protection against fault conditions and test results of a drive circuit for IGBT¿s based static switches. Careful focus is concentrated on developing a drive qualified for protecting the switch in fault conditions, for controlling switching times in PWM inverter applications, for minimising noise effects of high frequency switching and not requiring any additional floating power supply, by using control signal modulated at high frequency and memory effect of the switch input. The main characteristics of the drive are requirements to an industrial application - the control of the drying and oil filling processing in the power distribution transformers industry. This application is based on a 100 kVA low frequency inverter implemented with IGBT transistors, 300 A, 1000 V.
Idioma: Português
Tipo (Avaliação Docente): Científica
Nº de páginas: 4
Documentos
Não foi encontrado nenhum documento associado à publicação.
Recomendar Página Voltar ao Topo
Copyright 1996-2024 © Faculdade de Arquitectura da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z  I Livro de Visitas
Página gerada em: 2024-07-26 às 07:30:24 | Política de Utilização Aceitável | Política de Proteção de Dados Pessoais | Denúncias