Simulating catalytic membrane reactors using orthogonal collocation with spatial coordinates transformation

• Tipo: Artigo em Revista Científica Internacional
• Data: 2004

Autores

José Manuel Sousa (Autor) Outra; Adélio Mendes (Autor) FEUP

Revista

Título: Journal of Membrane Science

Vol. 243 Nº 1-2

Páginas: 283-292

ISSN: 0376-7388

Editora: Elsevier

Indexação

ISI Web of Knowledge - 14 Citações

ISI Web of Science

Scopus - 13 Citações

COMPENDEX

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia química

CORDIS: Ciências Tecnológicas > Tecnologia > Tecnologia química

Outras Informações

ID Authenticus: P-000-7Y6

DOI: 10.1016/j.memsci.2004.06.031

Abstract (EN): It is presented in this study a new numerical scheme using orthogonal collocation together with an independent variable (spatial coordinate) transformation, useful for solving the model equations associated to membrane reactors with catalytic membranes. This new scheme takes advantage of a noticeable feature of the concentration profile inside a catalytic membrane: close to the membrane surfaces, this profile becomes steeper and steeper with the Thiele modulus. Using traditional numerical methods for solving the model equations of a catalytic membrane reactor, namely finite differences with equispaced intervals or orthogonal collocation, for example, may lead to imprecise results. In order to illustrate the ability of this new numerical scheme for solving such equations, it is applied to the resolution of a case where an analytical solution is available (a generic A reversible arrow B reaction carried out in a catalytic membrane with perfectly mixed flow pattern in both retentate and permeate sides). Then, the same numerical scheme is used for solving a model describing the cyclohexane dehydrogenation, A reversible arrow B + 3C, carried out in a porous membrane with the same flow pattern as above-and the results are compared with the ones obtained using an adaptive wavelet-based method. For these two models, solutions were also obtained using straight orthogonal collocation and finite differences with homogeneously distributed grid points for the sake of the comparison. The results show that the new numerical approach is useful in dealing with this kind of problems, especially for high Thiele modulus values, showing high accuracy and demanding low computation time. Finally, this new scheme is applied to the resolution of a more complex model: a generic reaction 2Areversible arrowB, carried out in a dense catalytic cylindrical membrane with plug-flow pattern for both retentate and permeate sides.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 10