Mean velocity and moments of turbulent velocity fluctuations in the wake of a model ship propulsor

• Tipo: Artigo em Revista Científica Internacional
• Data: 2007

Autores

J. P. Pêgo (Autor) FEUP; H. Lienhart (Autor) Outra; F. Durst (Autor) Outra

Revista

Título: Experiments in Fluids

Vol. 43 Nº 2-3

Páginas: 463-473

ISSN: 0723-4864

Editora: Springer Nature

Indexação

ISI Proceedings

ISI Web of Knowledge - 1 Citação

ISI Web of Science

Scopus - 2 Citações

INSPEC

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Outras ciências da engenharia e tecnologias

CORDIS: Ciências Tecnológicas > Engenharia > Engenharia mecânica > Engenharia de sistemas de propulsão

Outras Informações

ID Authenticus: P-004-8BV

DOI: 10.1007/s00348-007-0294-2

Abstract (EN): Pod drives are modern outboard ship propulsion systems with a motor encapsulated in a watertight pod, whose shaft is connected directly to one or two propellers. The whole unit hangs from the stern of the ship and rotates azimuthally, thus providing thrust and steering without the need of a rudder. Force/momentum and phase-resolved laser Doppler anemometry (LDA) measurements were performed for in line co-rotating and contra-rotating propellers pod drive models. The measurements permitted to characterize these ship propulsion systems in terms of their hydrodynamic characteristics. The torque delivered to the propellers and the thrust of the system were measured for different operation conditions of the propellers. These measurements lead to the hydrodynamic optimization of the ship propulsion system. The parameters under focus revealed the influence of distance between propeller planes, propeller frequency of rotation ratio and type of propellers (co- or contra-rotating) on the overall efficiency of the system. Two of the ship propulsion systems under consideration were chosen, based on their hydrodynamic characteristics, for a detailed study of the swirling wake flow by means of laser Doppler anemometry. A two-component laser Doppler system was employed for the velocity measurements. A light barrier mounted on the axle of the rear propeller motor supplied a TTL signal to mark the beginning of each period, thus providing angle information for the LDA measurements. Measurements were conducted for four axial positions in the slipstream of the pod drive models. The results show that the wake of contra-rotating propeller is more homogeneous than when they co-rotate. In agreement with the results of the force/momentum measurements and with hypotheses put forward in the literature (see e.g. Poehls in Entwurfsgrundlagen fur Schraubenpropeller, 1984; Schneekluth in Hydromechanik zum Schiffsentwurf, 1988; Breslin and Andersen in Hydrodynamics of ship propellers, 1996; Schneekluth and Bertram in Ship design for efficiency and economy, 1998), the co-rotating propellers model showed a much stronger swirl in the wake of the propulsor. The anisotropy of turbulence was analyzed using the anisotropy tensor introduced by Lumley and Newman (J Fluid Mech 82(1):161-178, 1977). The invariants of the anisotropy tensor of the wake flow were computed and were plotted in the Lumley-Newman-diagram. These measurements revealed that the anisotropy tensor in the wake of ship propellers is located near to the borders of the invariant map, showing a large degree of anisotropy. They will be presented and will be discussed with respect to applications of turbulence models to predict swirling flows.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 11