Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > A study on the performance of a dense polymeric catalytic membrane reactor

A study on the performance of a dense polymeric catalytic membrane reactor

Título
A study on the performance of a dense polymeric catalytic membrane reactor
Tipo
Artigo em Revista Científica Internacional
Ano
2001
Autores
J. M. Sousa
(Autor)
Outra
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Cruz, P
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Ver página do Authenticus Sem ORCID
Adélio Mendes
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Revista
Título: Catalysis TodayImportada do Authenticus Pesquisar Publicações da Revista
Vol. 67
Páginas: 281-291
ISSN: 0920-5861
Editora: Elsevier
Indexação
Publicação em ISI Web of Science ISI Web of Science
COMPENDEX
Outras Informações
ID Authenticus: P-000-VGY
Abstract (EN): A theoretical study on a catalytic polymeric dense membrane reactor (CPDMR) is performed. The conversion enhancement over the thermodynamic equilibrium value is studied for an equilibrium gas-phase reaction of the type aA + bB <----> cC + do for three different conditions: Deltan > 0, Deltan = 0 and Deltan < 0, where Deltan = (c + d) - (a + b). For each of these cases, it is studied the influence of the reaction product sorption and diffusion coefficients. The model used considers perfectly mixed flow patterns and isothermal operation in the retentate and permeate sides. It is concluded that the conversion of a reversible reaction can be significantly enhanced when the diffusion coefficients of the products are higher than the reactants' and/or the sorption coefficients are lower. The extension of this enhancement depends on the reaction stoichiometry, global concentration inside the membrane, Thiele modulus and contact time values. It was also observed that it would be preferable to have a conversion enhancement based on higher product diffusion than on lower product sorption coefficients, since this leads to smaller reactor size. Since the performance of a dense membrane reactor depends on both the sorption and diffusion coefficients in a different way, a study of such a system cannot be based only on the permeabilities of the reaction components.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 11
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

Modeling a catalytic polymeric non-porous membrane reactor (2001)
Artigo em Revista Científica Internacional
J. M. Sousa; Cruz, P; Adélio Mendes

Da mesma revista

Special Issue on the 11th International Conference on Catalysis in Membrane Reactors Preface (2014)
Outra Publicação em Revista Científica Internacional
J. M. Sousa; Basile, A; Crespo, J
Introduction (2013)
Outra Publicação em Revista Científica Internacional
Joaquim L Faria; Pilar Fernandez Ibanez; Sixto Malato
Editorial of the special issue carbon for catalysis: CarboCat-VIII symposium (2020)
Outra Publicação em Revista Científica Internacional
Silva, Adrian; Manuel Fernando R Pereira; Joaquim Luís Faria; Figueiredo, JL
Wet peroxide oxidation of dye-containing wastewaters using nanosized Au supported on Al2O3 (2017)
Artigo em Revista Científica Internacional
Carmen S. D. Rodrigues; S. A. C. Carabineiro; F. J. Maldonado-Hódar; Luís M. Madeira
Vanadium as a catalyst for NO, N2O and CO2 reaction with activated carbon (2000)
Artigo em Revista Científica Internacional
Sónia Carabineiro; Fernandes, FB; Ramos, AM; Vital, J; Silva, IF

Ver todas (114)

Recomendar Página Voltar ao Topo