MIL-160(Al) MOF's potential in adsorptive water harvesting

• Tipo: Artigo em Revista Científica Internacional
• Data: 2021

Autores

M. P. Silva (Autor) Outra; Ana M. Ribeiro (Autor) FEUP; Claúdia G. Silva (Autor) FEUP; Ildefonso Nogueira (Autor) FEUP; Kyung-Ho Cho (Autor) Outra; U.-Hwang Lee (Autor) Outra; Joaquim Luís Faria (Autor) FEUP; J. L. loureiro (Autor) Outra; Jon-San Chang (Autor) Outra; Alírio E. Rodrigues (Autor) FEUP; Alexandre Ferreira (Autor) FEUP

Revista

Título: Adsorption

Vol. 27

Páginas: 213-226

ISSN: 0929-5607

Editora: Springer Nature

Indexação

ISI Web of Knowledge - 0 Citações

ISI Web of Science

Scopus - 0 Citações

Outras Informações

ID Authenticus: P-00T-9FN

DOI: 10.1007/s10450-020-00286-5

Abstract (EN): The water crisis is one of the main global risks based on its societal impact, particularly the access to safe drinking water in regions with a dry (arid) or mainly dry (semi-arid) climate. Several techniques are being developed, namely the use of regenerative desiccant (e.g., MOFs) to water capture through adsorption processes. MIL-160(Al) belongs to the fumarate-based MOFs family, and it is one of the most promising MOFs for water harvesting and heat transformation applications. In this study, the potential of MIL-160(Al) as an adsorbent for water sorption based applications was evaluated. For this purpose, adsorption equilibrium isotherms, dynamic adsorption experiments, and MIL-160(Al) granules characterization were performed. H2O vapor adsorption equilibrium isotherm was studied at 303, 323, and 343 K presenting a type V shape and was fitted using the Cooperative Multimolecular Sorption model and Polanyi's theory model. Additionally, CO2, N-2, and O-2 adsorption equilibrium isotherms were also measured but at 283, 303, and 323 K, presenting the following order of adsorption affinity: CO2 > O-2 > N-2. Water vapor adsorption breakthrough experiments corroborate the shape of the water adsorption equilibrium isotherms on MIL-160(Al). Water co-adsorption history proved that the presence of the other air components (CO2, O-2, and N-2) does not affect water adsorption behavior on MIL-160(Al). DRIFTS measurements proved the MIL-160(Al) structure remains stable during the water vapor exposure. The optimization of the TSA process allowed us to achieve maximum H2O productivity of 305 L center dot day(-1)center dot ton(-1) for a regeneration temperature of 353 K and flow rate equal to 0.50 m(3)center dot s(-1).

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 14