Resumo (PT):
Neste artigo é apresentado um estudo paramétrico sobre o efeito de vários parâmetros usados no
método de dimensionamento descrito na norma BS8006-1: 2009 na distribuição dos reforços em
estruturas de solo reforçado com geossintéticos. O dimensionamento da estrutura foi realizado
considerando soluções compostas por um tipo de solo e cinco tipos de geossintéticos. Os parâmetros
considerados foram: (1) o coeficiente de interação e o coeficiente de adesão entre o solo e o reforço; (2)
a resistência à tração na rotura do geossintético; (3) o fator parcial de segurança para a redução das
propriedades do reforço; e (4) a largura total das faces superior e inferior do reforço (por metro). A
estabilidade externa da estrutura foi verificada com a mesma norma. Algumas das conclusões observadas
no estudo permitem referir que, para a estrutura e as condições analisadas, o uso de diferentes
propriedades de interação entre o solo e o reforço é importante apenas quando o mecanismo de rotura
interna que condiciona a distribuição dos reforços na estrutura é o arranque; o mecanismo de rotura
interna por arranque é mais importante para o dimensionamento quando os reforços considerados têm
uma resistência à tração elevada; e a largura total das faces superior e inferior do reforço é muito
importante para evitar o desenvolvimento do mecanismo de rotura interna por arranque.
Abstract (EN):
This paper presents a parametric study regarding the effect of everal parameters used in the design method of British Standard BS8006-1: 2009 for the design of reinforced soil structures. The design of a
structure is performed using solutions which include one type of soil and five different geosynthetics. The parameters considered were: (1) the coefficient of friction and the adhesion coefficient between the soil
and the geosynthetic; (2) the ultimate tensile strength of the geosynthetic; (3) the partial material factor
for the reinforcement; and (4) the total horizontal width of the top and bottom faces of the reinforcing
element at the layer (per meter). The external stability is verified with the same standard. Among other
things, the results of this study allowed concluding the use of different properties of interaction between
the soil and the reinforcement is important only for the internal mechanism of failure by pullout; the
pullout mechanism is more important for the design of solutions where reinforcements that have a higher
tensile strength were considered; and the total horizontal width of the top and bottom faces of the
reinforcing element at the layer is important for the occurrence or not of the pullout.
Idioma:
Português
Tipo (Avaliação Docente):
Científica
Contacto:
lcosta@fe.up.pt
Nº de páginas:
8
Tipo de Licença: