Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Preparation of carbon molecular sieve membranes from an optimized ionic liquid-regenerated cellulose precursor

Preparation of carbon molecular sieve membranes from an optimized ionic liquid-regenerated cellulose precursor

Título
Preparation of carbon molecular sieve membranes from an optimized ionic liquid-regenerated cellulose precursor
Tipo
Artigo em Revista Científica Internacional
Ano
2019-02-15
Autores
Sandra C. Rodrigues
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Sem AUTHENTICUS Sem ORCID
Márcia Andrade
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Sem AUTHENTICUS Sem ORCID
Jamie Moffat
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Adélio Mendes
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Revista
Vol. 572
Páginas: 390-400
ISSN: 0376-7388
Editora: Elsevier
Indexação
Outras Informações
ID Authenticus: P-00P-Y42
Resumo (PT):
Abstract (EN): Novel carbon molecular sieve membranes with high separation performance and stability in the presence of humidified streams were prepared from an optimized ionic liquid-regenerated cellulose precursor, in a single carbonization step. Membranes prepared at two different carbonization end temperatures (550 degrees C and 600 degrees C) were analyzed through scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, carbon dioxide adsorption and permeation experiments. The prepared membranes exhibited uniform thickness of approximately 20 mu m and a well-developed microporous structure. The permeation performance of these carbon molecular sieve membranes was above the Robeson upper bound curve for polymeric membranes. In particular, the membrane prepared at 550 degrees C end temperature exhibited permeability to oxygen of 5.16 barrer and O-2/N-2 ideal selectivity of 32.3 and permeability to helium of 126 barrer and He/N-2 ideal selectivity of 788; besides, permeation experiments performed in the presence of ca. 80% relative humidity showed that humidity does not originate pore blockage. These results open the door for the preparation of tailor made precursors that originate carbon molecular sieve membranes with extraordinary separation performances, mechanical resistance and stability.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 11
Documentos
Nome do Ficheiro Descrição Tamanho
Rodrigues-2019-Preparation-of-carbon-molecular-sie 2369.16 KB
Publicações Relacionadas

Da mesma revista

Zirconium oxide hybrid membranes for direct methanol fuel cells - Evaluation of transport properties (2006)
Artigo em Revista Científica Internacional
Silva, VS; Ruffmann, B; Silva, H; Silva, VB; Adélio Mendes; Luis Madeira; Nunes, S
Xenon recycling in an anaesthetic closed-system using carbon molecular sieve membranes (2007)
Artigo em Revista Científica Internacional
S. Lagorsse; Magalhaes, F. D; A. Mendes
Thin-film composite forward osmosis membranes based on polysulfone supports blended with nanostructured carbon materials (2016)
Artigo em Revista Científica Internacional
Sergio Morales Torres; Carla M. P. Esteves; José L. Figueiredo; Adrián M. T. Silva
The effects of Anodonta cygnea biological fluids on biomineralization of chitosan membranes (2010)
Artigo em Revista Científica Internacional
Anabela Lopes; Manuel Lopes Lima; Iulius Bobos; Jorge Ferreira; Silvia Gomes; Rui Reis; Joao Mano; Jorge Machado
Study and optimization of aroma recovery from beer by pervaporation (2009)
Artigo em Revista Científica Internacional
Margarida Catarino; António Ferreira; Adélio Mendes

Ver todas (34)

Recomendar Página Voltar ao Topo