Go to:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Start > Publications > View > Water management in direct methanol fuel cells
Publication

Water management in direct methanol fuel cells

Title
Water management in direct methanol fuel cells
Type
Article in International Scientific Journal
Year
2009
Authors
C.M. Rangel
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
A.M.F.R. Pinto
(Author)
FEUP
View Personal Page You do not have permissions to view the institutional email. Search for Participant Publications View Authenticus page View ORCID page
Journal
Vol. 34 No. 19
Pages: 8245-8256
ISSN: 0360-3199
Publisher: Elsevier
Indexing
Scientific classification
FOS: Engineering and technology > Chemical engineering
Other information
Authenticus ID: P-003-FD3
Abstract (EN): Water management is an important challenge in portable direct methanol fuel cells. Reducing the water and methanol loss from the anode to the cathode enables the use of highly concentrated methanol solutions to achieve enhanced performances. In this work, the results of a simulation study using a previous developed model for DMFCs are presented. Particular attention is devoted to the water distribution across the cell. The influence of different parameters (such as the cathode relative humidity (RH), the methanol concentration and the membrane, catalyst layer and diffusion media thicknesses) over the water transport and on the cell performance is studied. The analytical solutions of the net water transport coefficient, for different values of the cathode relative humidity are successfully compared with recent published experimental data putting in evidence that humidified cathodes contribute to a decrease on the water crossover. As a result of the modelling results, a tailored MEA build-up with the common available commercial materials is proposed to achieve low methanol and water crossover and high power density, operating at relatively high methanol concentrations. A thick anode catalyst layer to promote methanol oxidation, a thin anode gas diffusion layer as methanol carrier to the catalyst layer and a thin polymer membrane to lower the water crossover coefficient between the anode and cathode are suggested.
Language: English
Type (Professor's evaluation): Scientific
Documents
We could not find any documents associated to the publication.
Related Publications

Of the same authors

Micro Direct Methanol Fuel Cells: Experimental and Modeling Studies (2013)
Poster in an International Conference
Daniela Falcão; Vânia Oliveira; C.M. Rangel; Alexandra Rodrigues Pinto

Of the same journal

Selected Papers from International Conference on Catalytic Membrane Reactors n. 11 (ICCMR11), 6-12 July 2013, Porto, Portugal (2014)
Another Publication in an International Scientific Journal
Basile, A; J. M. Sousa; João Crespo
Preface to the special issue on "The 1st international conference on Advanced Energy Materials (AEM2016), 12-14 September 2016, Surrey, England" (2017)
Another Publication in an International Scientific Journal
Titus, E; ventura, j.; Gil, JC; Neto, V; Singh, A; Chaudhari, A; Rangel, CM
Passive direct methanol fuel cells as a sustainable alternative to batteries in hearing aid devices- An overview (2022)
Another Publication in an International Scientific Journal
M. H. Sa; A.M.F.R. Pinto; V. B. Oliveira
1D and 3D numerical simulations in PEM fuel cells (2011)
Article in International Scientific Journal
D. S. Falcão; P. J. Gomes; V. B. Oliveira; C. Pinho; A. M. F. R. Pinto
Water handling challenge on hydrolysis of sodium borohydride in batch reactors (2012)
Article in International Scientific Journal
M. J. F. Ferreira; Carmen M. Rangel; A. M. F. R. Pinto

See all (78)

Recommend this page Top