Resumo (PT):
Descreve-se a determinação de ácido giberélico em promotores de crescimento usados na
agricultura, por análise de injecção sequencial e detecção potentiométrica. Os detectores
potentiométricos com características melhoradas usam uma membrana de PVC preparada com
Mn(III)tetrafenilporfirina-Cl ([(Mn(TPP)Cl]). Formularam-se diferentes membranas comparandose
aditivos iónicos com o objectivo de se seleccionar as unidades com as melhores características de
declive, tempo de resposta, reprodutibilidade e selectividade. Para fins analíticos foi seleccionada
uma membrana com 6% de [(Mn(TPP)Cl], 27% de PVC, 66% de dibutilftalato (DBP), como
solvente mediador, e 1% de tetrafenilborato de sódio, como aditivo aniónico. Quando inserido num
sistema SIA o eléctrodo tubular apresentava um intervalo de linearidade de 5×10-4 mol L-1 a 8×10-3
mol L-1, declive de –64,5 ± 1,6 mV/dec e melhores coeficientes de selectividade potenciométrica (log
Kpot) do que os obtidos com eléctrodos convencionais. Na análise de amostras comercializadas em
Portugal obtiveram-se desvios padrão de 0,01 e 0,4 (n= 4) e um ritmo de amostragem de 30
amostras/hora.
<br>
<br>
Keywords: gibberellic acid, ion selective tubular electrode, SIA, metalloporphyrins, agricultural
growth promoters
<br>
<a target="_blank" href="http://jbcs.sbq.org.br/jbcs/2004/vol15_n5/14-171-03.pdf"> Texto integral </a>
<br>
<br>
Abstract (EN):
This work describes the determination of gibberellic acid in growth promoters formulations used in agriculture by sequential injection analysis and potentiometric detection. The potentiometric detectors with improved characteristics used a PVC membrane prepared with Mn(III) tetraphenylporphyrin-Cl as electroactive specie. Different membranes formulated with several ionic additives were compared in order to select the most suitable one concerning slope, response time, reproducibility and selectivity. A membrane containing 6 wt% of manganese tetraphenylporphyrin-Cl [(Mn(TPP)Cl], 27 wt% of PVC, 66 wt% of dibutylphthalate (DBP), as mediator solvent, and 1 wt% of sodium tetraphenylborate, as anionic additive, was chosen for analytical applications. When coupled to a SIA system the tubular electrode presented a linear range between 5 x 10(-4) mol L-1 and 8 x 10(-3) mol L-1, a slope of -64.5 +/- 1.6 mV/dec and lower potentiometric selectivity coefficients (log K-pot) than those obtained with the conventional electrodes. Standard deviation of 0.01 and 0.4 (n = 4) and a sampling rate of 30 samples/hour were obtained in the analysis of real samples.
Idioma:
Inglês
Tipo (Avaliação Docente):
Científica
Nº de páginas:
7