Photolytic and TiO2-assisted photocatalytic oxidation of the anxiolytic drug lorazepam (Lorenin (R) pills) under artificial UV light and natural sunlight: A comparative and comprehensive study

• Tipo: Artigo em Revista Científica Internacional
• Data: 2013

Autores

M. A. Sousa (Autor) FEUP; C. Gonçalves (Autor) Outra; João H. O. S. Pereira (Autor) FEUP; Vítor J. P. Vilar (Autor) FEUP; Rui A. R. Boaventura (Autor) FEUP; M. F. Alpendurada (Autor) Outra

Revista

Título: Solar Energy

Vol. 87 Nº 1

Páginas: 219-228

ISSN: 0038-092X

Editora: Elsevier

Indexação

ISI Web of Knowledge - 26 Citações

ISI Web of Science

Scopus - 32 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia do ambiente

CORDIS: Ciências Tecnológicas > Tecnologia > Tecnologia ambiental

Projetos Associados

LA 20 - Projeto Estratégico-LA 20 - 2011-2012

PTDC/AAC-AMB/113091/2009 - Eliminação de micropoluentes com actividade antimicrobiana de águas residuais

Outras Informações

ID Authenticus: P-002-1TF

DOI: 10.1016/j.solener.2012.10.013

Abstract (EN): Lorazepam is a recalcitrant drug, frequently quantified in WWTPs' effluents and surface waters, even though it has never been studied under accelerated phototransformation processes. Therefore, the main goal of the present work was to comparatively evaluate lorazepam's photolytic and photocatalytic degradation kinetics using two experimental systems: a lab-scale photochemical reactor provided with an UV medium pressure mercury lamp (LsAUVP) and a solar pilot plant with compound parabolic collectors (SPP-CPCs). Lorazepam was tested in its most commercialized dosage form in Portugal - Lorenine (R) pills, 1 mg ( Wyeth), thus simulating a more realistic scenario. Preliminary results showed that, using the LsAUVP apparatus, lorazepam's highest degradation yield was obtained through photolysis, while using the SPP-CPCs system, the best degradation performance was achieved by photocatalysis with a TiO2 concentration of 200 mg L-1. Furthermore, the degradation kinetic constant obtained for the optimized method when using the SPP-CPCs system (k = 1.49 +/- 0.03 L kJ(-1)) was higher than that with the LsAUVP set-up (k = 0.131 +/- 0.006 L kJ(-1)), which in terms of necessary accumulated UV energy for complete lorazepam degradation, considering the respective method's detection limit (MDL), corresponds to ca. 3 and 25 kJ L-1, respectively. (C) 2012 Published by Elsevier Ltd.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 10