Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > Unlocking the Potential of Second-order Computational Homogenisation: An Overview of Distinct Formulations and a Guide for their Implementation

Unlocking the Potential of Second-order Computational Homogenisation: An Overview of Distinct Formulations and a Guide for their Implementation

Título
Unlocking the Potential of Second-order Computational Homogenisation: An Overview of Distinct Formulations and a Guide for their Implementation
Tipo
Outra Publicação em Revista Científica Internacional
Ano
2021
Revista
Vol. 29 2
Páginas: 1339-1393
ISSN: 1134-3060
Editora: Springer Nature
Outras Informações
ID Authenticus: P-00V-5V0
Abstract (EN): Multi-scale models enriched with the second gradient of the displacement field and based on the concept of representative volume element (RVE) are examined and discussed in detail in this paper. The development of new models relies on the Method of Multi-Scale Virtual Power from which equilibrium equations and homogenisation relations are derived employing variational arguments. Two classes of enhanced multi-scale constitutive models are analysed: standard second-order homogenisation and fully second-order homogenisation. On the computational side, the numerical treatment of second gradient equilibrium problems with a mixed approach is addressed systematically within an implicit finite element discretisation in conjunction with the full Newton-Raphson scheme for the iterative solution of the corresponding non-linear systems of equations. Different formulations available in the literature for standard second-order homogenisation are presented, along with a critical appraisal of their assumptions and limitations. A macroscopic second-gradient constitutive law with an orthotropic length scale is developed based on numerical findings. The impact of finite strains, the micro constituents' behaviour, and the RVE morphology on the resulting macroscopic length scale parameter's evolution is assessed. A fully second-order homogenisation-based model at finite strains is also presented. The suitability of this class of models to capture size effects due to the micro-constituent's size is illustrated by an FE2 simulation.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 55
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

Second-order multi-scale modelling of natural and architected materials in the presence of voids: Formulation and numerical implementation (2023)
Artigo em Revista Científica Internacional
dos Santos, WF; Lopes, IAR; F.M. Andrade Pires; Proença, SPB
Second-order homogenisation of crystal plasticity and martensitic transformation (2023)
Artigo em Revista Científica Internacional
Lopes, IAR; de Carvalho, MV; da Silva, JAM; Coelho, RPC; F.M. Andrade Pires
On the solution of unstable fracture problems with non-linear cohesive laws (2024)
Artigo em Revista Científica Internacional
de Carvalho, MV; Lopes, IAR; F.M. Andrade Pires
On the representativeness of polycrystalline models with transformation induced plasticity (2023)
Artigo em Revista Científica Internacional
da Silva, JAM; de Carvalho, MV; Coelho, RPC; Lopes, IAR; F.M. Andrade Pires
On the efficient enforcement of uniform traction and mortar periodic boundary conditions in computational homogenisation (2021)
Artigo em Revista Científica Internacional
Lopes, IAR; Ferreira, BP; F.M. Andrade Pires

Ver todas (12)

Da mesma revista

Recent Tools and Techniques of BIM-Based Virtual Reality: A Systematic Review (2019)
Outra Publicação em Revista Científica Internacional
Adeeb Sidani; Fábio Matoseiro Dinis; Luís Sanhudo; Joana Duarte; João Santos Baptista; João Poças Martins; Alfredo Soeiro
Data Digitalisation in the Open-Pit Mining Industry: A Scoping Review (2020)
Outra Publicação em Revista Científica Internacional
Joana Duarte; Maria Fernanda Rodrigues; João Santos Baptista
BIM and Semantic Enrichment Methods and Applications: A Review of Recent Developments (2021)
Outra Publicação em Revista Científica Internacional
Fábio Matoseiro Dinis; João Poças Martins; Ana Sofia Guimarães; Bárbara Carvalho
A Review on Finite-Element Simulation of Fibre Metal Laminates (2022)
Outra Publicação em Revista Científica Internacional
Smolnicki, M; Lesiuk, G; Duda, S; Abilio M P De Jesus
Simulation of the Mechanical Response of Thin-Ply Composites: From Computational Micro-Mechanics to Structural Analysis (2018)
Artigo em Revista Científica Internacional
Alberto Arteiro; Giuseppe Catalanotti; José Reinoso; Peter Linde; Pedro P. Camanho
Recomendar Página Voltar ao Topo
Copyright 1996-2024 © Faculdade de Engenharia da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z  I Livro de Visitas
Página gerada em: 2024-11-01 às 13:27:20 | Política de Utilização Aceitável | Política de Proteção de Dados Pessoais | Denúncias