Thermal switching requirements for solid state magnetic refrigeration

• Tipo: Artigo em Revista Científica Internacional
• Data: 2021

Autores

D. J. Silva (Autor) FCUP; A. M. Pereira (Autor) FCUP; J. Ventura (Autor) FCUP; J. P. Araújo (Autor) FCUP; J.C.R.E. Oliveira (Autor) FEUP

Revista

Título: Journal of Magnetism and Magnetic Materials

Vol. 533 Nº 167979

ISSN: 0304-8853

Editora: Elsevier

Indexação

ISI Web of Knowledge - 3 Citações

Scopus - 6 Citações

Outras Informações

ID Authenticus: P-00T-V4C

DOI: 10.1016/j.jmmm.2021.167979

Abstract (EN): Magnetic refrigeration, based on the magnetocaloric effect, is an attractive alternative to the conventional vaporcompression technology. In a solid state magnetic refrigerator the traditional alternated fluid flow is replaced by two solid thermal switches (TSs) that control the heat flux. These TSs are materials, or devices, whose thermal conductivity changes with an external stimulus. Here, we numerically investigate how the performance of a solid state magnetic refrigerator depends on the TS thermal conductivities (k) and corresponding k-variations (Delta k) with the magnetic field. Two different scenarios were considered: a single TS and a double TS magnetic refrigerator. We have numerically varied the thermal conductivity of the thermal switches, operating frequency and working temperature. The use of only one thermal switch with near-ideal Delta k is enough if the required performance does not overcome half of the adiabatic temperature change (Delta Tad) of the magnetocaloric material. To overcome this value the device must use two effective thermal switches. Using an additional thermal switch is only beneficial when Delta Tad needs to be overcome, or when the first thermal switch shows a modest Delta k. These results simplify the operability control, which will increase the interest for magnetically activated thermal switches operating at acceptable magnetic fields.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 6