Code: | EEC0115 | Acronym: | DESI |
Keywords | |
---|---|
Classification | Keyword |
OFICIAL | Power |
Active? | Yes |
Responsible unit: | Department of Electrical and Computer Engineering |
Course/CS Responsible: | Master in Electrical and Computers Engineering |
Acronym | No. of Students | Study Plan | Curricular Years | Credits UCN | Credits ECTS | Contact hours | Total Time |
---|---|---|---|---|---|---|---|
MIEEC | 2 | Syllabus | 5 | - | 6 | 56 | 162 |
1- BACKGROUND
Dynamic security assessment is a crucial task to obtain an efficient planning and operation of power systems. Therefore, having the skills to perform this task is of major importance for power system engineers.
2- SPECIFIC AIMS
Be able to understand and model the dynamic behavior of power systems. Understand the different dynamic phenomena that can appear in a power system, resulting from disturbances, which may lead to loss of system security. Be familiarized with the tools and methodologies that can be used to study and solve these problems.
- Understand the different dynamic phenomena that can appear in a power system, resulting from disturbances, which may lead to loss of system security.
- Be able to master the modeling of synchronous generators, loads, excitation systems, automatic voltage regulators (AVR), prime movers (hydraulic turbines, thermal units) and frequency regulation systems, for dynamic analysis studies.
- Be capable of using dynamic simulation software for the purpose of developing transient and dynamic analysis of power systems.
- Understand the operation of primary, secondary and tertiary load-frequency control systems in interconnected power systems.
- Identify the nature of power system oscillations and characterize such oscillations using modal analysis.
- Be familiar with power system stabilizers and the procedures for tuning these controllers to increase the damping of electromechanical modes of oscillation
- Be aware of the methodology required to apply automatic learning techniques in order to obtain on-line dynamic security assessment tools in power systems.
Basic courses about: power systems operation, steady-state and transient analysis of power systems.
1 – POWER SYSTEM DYNAMIC SECURITY ASSESSMENT Understand: Why and when dynamic security assessment is performed in power systems; The different types of dynamic problems that can appear in power systems, namely, with an high renewable power production; The tools and methodologies that can be used to study and solve these problems.
2 - POWER SYSTEM DYNAMIC MODEL Detailed modeling of synchronous generators, loads, excitation systems and automatic voltage regulators (AVR), prime movers (hydraulic turbines, thermal units) and frequency regulation systems, for dynamic analysis studies. Modeling Automatic Generation Control system and performance analysis in power systems with several control areas.
3 - LOAD-FREQUENCY CONTROL SYSTEM Description of the dynamic behavior and management of primary, secondary and tertiary load-frequency control systems in large interconnected power systems.
4 - SMALL-SIGNAL STABILITY IN POWER SYSTEMS Analysis of power system oscillations due to the lack of damping torque at the generators rotors. Study of these phenomena, using linearized models of the power system around an operating point and eigenvalue-based methods (modal analysis). Review of the concepts of eigenvalue analysis of linear systems, addressing the linearization of the state equations, the construction of the linear model in the canonic state space form and the physical meaning of eigenvalues, eigenvectors, participation factors, residues and controllability and observability factors. Design of power system damping controllers, tackling with the configuration of power system stabilizers (PSS) and the procedures for tuning these PSS.
5 - AUTOMATIC LEARNING TECHNIQUES FOR DYNAMIC SECURITY ASSESSMENT Application of automatic learning techniques in order to provide real-time dynamic security assessment of power systems. The specific situations of isolated and interconnected power systems, with high penetration of wind power production, will be analyzed.
Theoretical classes are based on oral presentation, supported by a board and data show. Theoretical-practical classes take place in the computer laboratory. In these classes, students must do an assignment, supported by the teacher supervision. The assignment aims the dynamic analysis of a fictitious power system, with typical characteristics, by using a dynamic simulation software tool provided by the teacher.
Designation | Weight (%) |
---|---|
Exame | 60,00 |
Trabalho escrito | 40,00 |
Total: | 100,00 |
Designation | Time (hours) |
---|---|
Elaboração de projeto | 27,00 |
Elaboração de relatório/dissertação/tese | 27,00 |
Estudo autónomo | 56,00 |
Frequência das aulas | 52,00 |
Total: | 162,00 |
Not exceed the maximum allowed number of absences to classes, having a minimum grade of 40% in this assignment; having a minimum grade of 40% in this exam.
0.6*Exam + 0.4*Assignment
There is one assignment aiming the dynamic analysis of a fictitious power system, with typical characteristics, by using a dynamic simulation software tool provided by the teacher.
Students with a special status have also to do the assignment, and to deliver it at the same time as for ordinary students. The assignment is the same for all students.
Only possible for the final exam.
This course requires the student to be aware of knowledge’s presented in the following courses: Regimes Estacionários do SEE (EEC0105) and Regimes Transitórios do SEE (EEC0106). It is the student's responsibility to ensure mastery of the topics covered in these courses.