Code: | EC0046 | Acronym: | PFAB |
Keywords | |
---|---|
Classification | Keyword |
OFICIAL | Materials |
Active? | Yes |
Responsible unit: | Construction Materials Division |
Course/CS Responsible: | Master in Civil Engineering |
Acronym | No. of Students | Study Plan | Curricular Years | Credits UCN | Credits ECTS | Contact hours | Total Time |
---|---|---|---|---|---|---|---|
MIEC | 7 | Syllabus since 2006/2007 | 5 | - | 5 | 52,5 | 133 |
Recently, prefabrication has received growing attention and nowadays it plays a central role in the industrialization of the construction with reinforced and prestressed concrete. This construction procedure involves several specificities, in comparison with the traditional procedures of construction “in-situ”.
This course unit aims to provide basic information on the different topics covered by the program of the course unit. The student shall be able to apply the information provided and the code provisions, to the resolution of practical problems presented in the practical classes. The student shall be able to analyse alternative solutions for the construction of prefabricated floors and for the connection between precast elements. The student shall be able to judge and evaluate the adopted strategies for the solution of the problems. Contact with the organization and procedures of real prefabrication companies will be provided by field trips to precast plants.
This course unit aims to provide basic information on the different topics covered by the program of the course unit. The student shall be able to apply the information provided and the code provisions, to the resolution of practical problems presented in the practical classes. The student shall be able to analyse alternative solutions for the construction of prefabricated floors and for the connection between precast elements. The student shall be able to judge and evaluate the adopted strategies for the solution of the problems. Contact with the organization and procedures of real prefabrication companies will be provided by field trips to precast plants.
Chapter 1 PREFABRICATION IN CONSTRUCTION
Industrialization of construction.
Advantages and inconveniences of prefabrication.
Quality, execution deadlines, costs, conception and security.
Prefabricated solutions in wood, metallic materials and concrete.
Chapter 2 PREFABRICATION IN CONCRETE
Light, half-light and heavy prefabrication.
Products produced in Portugal.
Plain concrete products.
Reinforced structural concrete products.
Complex of reinforced structural concrete products.
New materials in concrete prefabrication.
Chapter 3 QUALITY IN CONCRETE PREFABRICATED ELEMENTS
Quality in construction, design and execution.
Product quality.
New technologies and constructive procedures.
Quality control.
Chapter 4 CODES ON PREFABRICATION IN CONCRETE
European regulation.
Constructive procedures.
Conception and design of sections, elements and connections.
Chapter 5 PREFABRICATION OF FLOOR STRUCTURES
Slabs.
Systems for prefabrication of building floors.
Composite beam-block floors. Conception and design. Constructive procedures.
Composite slabs made of solid planks with in-situ concrete. Conception and design. Constructive procedures.
Hollow core slabs. Conception and design. Constructive procedures.
Double-T units with topping. Conception and design. Constructive procedures.
Chapter 6 CONNECTIONS BETWEEN PRECAST ELEMENTS IN CONCRETE BUILDINGS
Basic mechanisms for transference of shear and axial forces (compression and tension).
Pinned and fixed connections.
Beam-column connections. Column-column connection. Column-foundation connection.
European codes.
Elastomeric bearing pads. Elastomeric reinforced bearing pads. Conception and design.
Connection to the supports in between beam-block floor systems.
Tying systems and structural integrity in case of accident.
DEMONSTRATION OF THE SYLLABUS COHERENCE WITH THE CURRICULAR UNIT'S OBJECTIVES:
The syllabus focuses on the various issues indicated in the unit’s objectives. The acquisition of key competencies and skills is stimulated though theoretical presentations and discussions, and also by means of the confrontation with practical problems and contact with one or more prefabrication companies. The syllabus is organized in such a way so that generic knowledge is transmitted initially. The degree of detail is progressively increased, so that the various issues under analysis can be adequately managed and understood.
Lectures comprise oral presentations and discussion of case studies. Practical lessons include practical problems, calculation of applications and also field trips to precast plants.
DEMONSTRATION OF THE COHERENCE BETWEEN THE TEACHING METHODOLOGIES AND THE LEARNING OUTCOMES:
The combination of theoretical presentations, discussion of the course-unit contents, solving of practical problems and field trips allows for an efficient learning experience at this education level.
Designation | Weight (%) |
---|---|
Exame | 75,00 |
Teste | 25,00 |
Total: | 100,00 |
Designation | Time (hours) |
---|---|
Estudo autónomo | 56,00 |
Total: | 56,00 |
Achieving final classification requires compliance with attendance at the course unit, according to the MIEC assessment rules. It is considered that students meet the attendance requirements if, having been regularly enrolled, the number of absences of 25% for each of the classes’ types is not exceeded.
The final classification is quantified considering two components: distributed evaluation (three short-duration tests) and final exam. The distributed evaluation is optional. The classification of any component is expressed in a scale of 0 to 20.
The final classification, CF, is quantified by employing the following formula:
CF = max {CT ; EF}
where,
CT = PA / 3 x ( CAD1 + CAD2 + CAD3) + PF x EF
CAD1 – classification of the short-duration test number 1, to be done during one practical class;
CAD2 – classification of the short-duration test number 2, to be done during one practical class;
CAD3 – classification of the short-duration test number 3, to be done during one practical class;
EF – classification of the final exam.
The weights are:
PA = 25%
PF = 75%
NOTE 1: The tests CAD1 a CAD3 are optional. If the student does not do one particular test, the corresponding weight is added to PF.
NOTE 2: All the students enrolled in the course unit are evaluated according to this method.
NOTE 3: The distributed evaluation obtained in previous occurrences of this course unit (by students which were enrolled in this course unit in the previous occurrence) is not valid in the current occurrence.
Not applicable.
The final classification for students which require special exams (according to the rules included in the FEUP code) is established based on a single exam.
Classification improvement, for students which are properly registered for classification improvement in the FEUP desk, is based on a single exam. The final classification is equal to the greatest of the classification obtained in such exam and the previously reached positive classification.
The final classification of students in mobility programs is quantified considering the two components (distributed evaluation and final exam), according to the criteria describe above for ordinary students.
...........................................................
Estimated working time out of classes: 3 hours per week