Go to:
Logótipo
You are here: Start > Publications > View > Thermodynamic analysis of olive oil mill wastewater steam reforming
Today is sunday
Inauguração da Exposição A Velha Escola Morreu
Publication

Thermodynamic analysis of olive oil mill wastewater steam reforming

Title
Thermodynamic analysis of olive oil mill wastewater steam reforming
Type
Article in International Scientific Journal
Year
2019
Authors
Miguel A. Soria
(Author)
FEUP
View Personal Page You do not have permissions to view the institutional email. Search for Participant Publications View Authenticus page View ORCID page
Luís M. Madeira
(Author)
FEUP
View Personal Page You do not have permissions to view the institutional email. Search for Participant Publications View Authenticus page Without ORCID
Journal
Vol. 83 No. 5
Pages: 1599-1609
ISSN: 1743-9671
Publisher: Elsevier
Indexing
Publicação em ISI Web of Knowledge ISI Web of Knowledge - 0 Citations
INSPEC
Other information
Authenticus ID: P-00P-MFH
Resumo (PT):
Abstract (EN): A thermodynamic analysis of the steam reforming of olive oil mill wastewater (OMW) was performed in a traditional reactor (TR). The equilibrium compositions are calculated employing the Gibbs free energy minimization method (using Aspen Plus V8.8 (R) software). The simulations were performed at different temperatures (300-1000 degrees C), different pressures (1-20 bar) and different compositions of the OMW, which might differ considerably. It was found that the H-2 yield increases with the temperature up to a maximum value, while it continuously decreases with the pressure. In opposition, the water content in the feed increases the H-2 yield, thus providing opportunity to take advantage of the waste aqueous matrix. The optimum operating conditions for several OMW compositions, corresponding to either real or simulated effluents from different areas, were determined; this is a very important aspect that allows to assess, in advance, the potential of such waste valorization into green hydrogen production. Moreover, it was found a good agreement between the maximum H-2 yield obtained for each wastewater and the ones predicted based on their compositions. Coke formation was also accounted, which increases when decreasing either temperature or water content in the feed. However, for a water content in the feed greater than 60 wt.% (which is the case of most OMWs) there is no coke formation whatever the temperature and pressure (within the ranges used in this study) and for all the effluent compositions considered.
Language: English
Type (Professor's evaluation): Scientific
No. of pages: 11
Documents
We could not find any documents associated to the publication with allowed access.
Related Publications

Of the same authors

Catalytic Steam Reforming of Biomass-Derived Oxygenates for H2 Production: A Review on Ni-Based Catalysts (2022)
Another Publication in an International Scientific Journal
Silva J.; Cláudio Rocha; Soria, M. A.; Luis Madeira
Use of Ni-containing catalysts for synthetic olive mill wastewater steam reforming (2022)
Article in International Scientific Journal
Cláudio Rocha; M. A. Soria; Luís Madeira
Techno-economic analysis of the olive oil mill wastewater steam reforming process: A case-study (2022)
Article in International Scientific Journal
Cláudio Rocha; Soria, M. A.; Martins, FG; Luis Madeira
Steam reforming of olive oil mill wastewater with in situ hydrogen and carbon dioxide separation - Thermodynamic analysis (2017)
Article in International Scientific Journal
Cláudio Rocha; Soria, M.; Luis Madeira
Screening of commercial catalysts for steam reforming of olive mill wastewater (2021)
Article in International Scientific Journal
Cláudio Rocha; Soria, M.; Luis Madeira

See all (11)

Of the same journal

Impact of climate change on cooling energy consumption (2010)
Article in International Scientific Journal
José Orosa; Armando C. Oliveira
Recommend this page Top
Copyright 1996-2024 © Faculdade de Engenharia da Universidade do Porto  I Terms and Conditions  I Accessibility  I Index A-Z  I Guest Book
Page generated on: 2024-11-03 at 04:57:25 | Acceptable Use Policy | Data Protection Policy | Complaint Portal