Go to:
Logótipo
You are here: Start > Holders of a Especialização Tecnológica diploma - 2025/2026
B-On anuncia condições para publicação em Acesso Aberto no triénio 2025-2027
Applications

Holders of a Especialização Tecnológica diploma - 2025/2026

Available courses

Undergraduate degree

Applicants

Note: Provisional information. Approval pending. 

Holders of a technological specialization certificate issued by the school where the Technological Specialization Course (CET) is taught, and which must have a Protocol with FEUP, may apply.

Note: Applicants covered by the international student status, in accordance with Article 3 of Decree-Law No. 62/2018, of August 6th, amended by Decree-Law No. 20/2025, of March 18th (only available in Portuguese), and Article 1 of Regulation 664/2018, of October 16th - Implementing regulation of the international student status at the University of Porto, cannot apply under this regime.


Tuition fees:
Information on tuition fees for 2025/2026

Numerus Clausus

Programmes/Cycle of Studies Phase Numerus Clausus Curricular year
Bachelor in Electrical and Computer Engineering 1 2
Bachelor in Informatics and Computing Engineering 1 1
Bachelor in Materials Engineering 1 1
Bachelor in Mechanical Engineering 1 5
Cycle of Studies Places
Bachelor in Bioengineering (L.BIO) 0
Bachelor in Aerospace Engineering (L.AERO) 0
Bachelor in Civil Engineering (L.EC) 0
Bachelor in Materials Engineering (L.EMAT) 1
Bachelor in Mining and Geo-Environmental Engineering (L.EMG) 0
Bachelor in Environmental Engineering (L.EA) 0
Bachelor in Industrial Engineering and Management (L.EGI) 0
Bachelor in Electrical and Computers Engineering (L.EEC) 2
Bachelor in Informatics and Computing Engineering (L.EIC) 1
Bachelor in Mechanical Engineering (L.EM) 5
Bachelor in Chemical Engineering (L.EQ) 0

The places indicated are intended for the following protocols (Course/School) established with FEUP:
  • CET em Automação, Robótica e Controlo Industrial / ATEC - L.EM e L.EEC
  • CET em Gestão de Redes e Sistemas Informáticos / ATEC - L.EEC e L.EIC
  • CET em Tecnologia Mecatrónica / ATEC - L.EM e L.EEC
  • CET em Tecnologia Mecatrónica Automóvel, Planeamento e Controlo de Processos / ATEC - L.EM
  • CET em Tecnologias e Programação de Sistemas de Informação / ATEC – L.EIC
  • CET em Tecnologia de Materiais,  Metalurgia e Metalomecânica / CINFU – L.EMAT
  • CET em Gestão e Controlo de Energia / ATEC – L.EEC
  • CET em Cibersegurança / ATEC – L.EIC

Applications

Deadlines

Single Phase
From June 02nd to July 31st 2025 Submission of applications
September 02nd 2025 Posting of provisional results
From September 03rd to 16th 2025 Prior hearing
September 18th 2025 Posting of final results
From September 19th to October 09th 2025 Submission of complaints
October 16th 2025 Publishing of decision about complaints
From September 19th to 24th 2025 Enrolment
From September 26th to October 03rd 2025 Admission of non-placed applicants*
Until September 24th 2025 Request of credit transfer regarding prior training / work experience

15 working days after the end of the enrolment period or after the conclusion of the credit transfer process

Publishing of credit transfer results
Up to 10 working days after the publication of the credit transfer results Change of the registration in result of the credit transfer process

*The eventual call of non-placed applicants will be made by e-mail sent to the address indicated on the application process. Applicants who are called will have 24 hours to reply and say whether they are interested in the place available. After this deadline, and if there is no reply from the applicant called, this applicant will lose the chance to occupy the place available and the following non-placed applicant in the ranking list will be called.

Pre-requirement of Qualification

5The following prior qualifications are required:
  1. Having done the secondary education national examinations that correspond to the entrance examinations required for the cycle of studies students are applying for.
  2. Having obtained in the entrance examinations the minimum grades indicated in the following table:

Cycle of Studies Entrance examinations (2025/2026)
and
Minimum grade
(from 0 to 200)
Bachelor in Electrical and Computers Engineering 07 Physics and Chemistry: 95 points
19 Mathematics A: 120 points
Bachelor in Informatics and Computing Engineering One of the following sets:
07 Physics and Chemistry: 140 points
19 Mathematics A: 140 points
or
18 Portuguese: 140 points
19 Mathematics A: 140 points
Bachelor in Mechanical Engineering 07 Physics and Chemistry: 130 points
19 Mathematics A: 130 points
Bachelor in Materials Engineering 07 Physics and Chemistry: 95 points
19 Mathematics A: 95 points

Ranking Criteria

In the formula for calculating the application grade, the final grade obtained in the Technological Specialization Course (on a scale from 0 to 200) shall have a weight of 50% and the entrance examinations grade shall have a weight of 50% (25% each).

Applicants will be placed in each cycle of studies according to the application grade that results from the defined ranking criteria.

Only applicants with an application grade equal to or higher than 95 points (0-200 scale) will be admitted.

For the Bachelor in Informatics and Computing Engineering (L.EIC), only applicants with an application grade equal to or higher than 140 points (0-200 scale) will be admitted.


Tie-breaking criterion
In the event of a tie, priority will be given to applicants who have obtained the best grade on the entrance examinations.

Documents Required

  • ID document (Citizen Card/ID Card/Passport) or declaration containing the identification data (mandatory);
  • Document certifying that the applicant holds a technological specialization certificate, including the corresponding final grade (mandatory);
  • Supporting document stating the grades obtained in the secondary education national examinations that correspond to the entrance examinations required for the cycle of studies students are applying for (mandatory);
  • Curriculum vitae (mandatory);
  • Photo (optional).

Fees

Application is subject to the payment of a non-refundable fee of 55 euros.

Procedure to pay through one of the payment methods available in the current account (ATM references, MBWay or Visa or Mastercard credit card):
1. Click on the image  associated to the amount you wish to pay.
2. In the UP's payment portal you should select the payment method you want to use and proceed in accordance with the instructions of the chosen method until the payment is successfully made. 

In the case of payments made from abroad and if it is not possible to use one of the methods mentioned above, you may exceptionally make a bank transfer, with the expenses on behalf of the payer, using the data in the linked document. In this case, you should send the proof of bank transfer to tesouraria@fe.up.pt, with the following data:
name of the payer and name of the applicant, as well as indication of the purpose of the payment (application).

Note:
- After the deadline for submission of applications, any applications regarding which fees have not been paid will be rejected outright.

Procedures

Procedure for submission of application
  1. Choose the intended cycle of studies/course and access regime (Applications).
  2. Select "Apresentar candidatura" (Submit application). If you are already a student at FEUP, you will have to log in using your student’s username and password. If you are not a student at FEUP, you will be asked to complete a user registration form. The credentials (username and password) will be sent to the email address you specify on that form. For technical reasons, it is not advisable to use Hotmail or Yahoo e-mail addresses.
  3. Fill in the application form and attach the requested documents. Please note that fields in red are mandatory.
  4. Submit your application. If an error is detected (e.g. mandatory fields left blank), the system displays an alert message.
    If the information is successfully submitted, you must check all data entered and either confirm or edit the data.
  5. After confirmation of your application submission you will see information regarding the payment of the corresponding fee. For payments made from abroad, please check the information available in the Fees section (see above).
  6. If you have encountered any problems while submitting your application, you must report them to ingresso@fe.up.pt during the application submission period or on the working day following the deadline for submission.
Procedure for checking the status of your application
  1. Log into the information system with the username and password that you used in your application;
  2. Click on your name;
  3. Select the academic year of the application(s) you submitted;
  4. In the options that appear on the right hand side of the page, select "Candidaturas de Ingresso" (Applications).
Procedure to request credit transfer/recognition
  1. Credit transfer/recognition request (optional) is subject to the non-refundable payment of the fees set-out in Tabela de Emolumentos da U.Porto.
  2. If you wish to create a credit transfer request, in the field "You want to make a request for recognition" of the application form, select "Yes".
  3. In the options on the right hand side of the page, under "Reconhecimentos" (Credit transfer), select "Criar/Editar" (Create/Edit) and enter the request.
  4. After creating the credit transfer/recognition request, you must complete and submit the application.
Procedure for enrolment
This procedure will be available through a link on the homepage of FEUP at the beginning of the enrolment period.

Applicable Legislation

Note: The following applicable legislation is only available in Portuguese.

Decree-Law No. 88/2006, of May 23rd - Regulates technological specialization courses, which is post-secondary training awarding a level 4 vocational qualification, amended by:
 

 

Recommend this page Top
Copyright 1996-2025 © Faculdade de Engenharia da Universidade do Porto  I Terms and Conditions  I Accessibility  I Index A-Z  I Guest Book
Page generated on: 2025-06-14 at 17:06:02 | Acceptable Use Policy | Data Protection Policy | Complaint Portal