Piezoelectric actuators for acoustic mixing in microfluidic devices-Numerical prediction and experimental validation of heat and mass transport

• Tipo: Artigo em Revista Científica Internacional
• Data: 2014

Autores

Catarino, SO (Autor) Outra; Silva, LR (Autor) Outra; Mendes, PM (Autor) Outra; Miranda, JM (Autor) FEUP; Lanceros Mendez, S (Autor) Outra; Minas, G (Autor) Outra

Revista

Título: Sensors and Actuators, B: Chemical

Vol. 205

Páginas: 206-214

ISSN: 0925-4005

Editora: Elsevier

Indexação

ISI Web of Knowledge - 20 Citações

Scopus - 33 Citações

Outras Informações

ID Authenticus: P-009-V82

DOI: 10.1016/j.snb.2014.08.030

Abstract (EN): Microfluidic devices have been used for handling and analyzing micro scale fluidic quantities with small concentrations, relying on smaller devices, with increased portability and availability. This paper proposes a solution to reduce the mixing time required in microfluidic devices analyses, without the need of pumps or moving parts. To speed up the required mixing, acoustic streaming is proposed. Two different piezoelectric materials, PZT and beta-PVDF, are explored, concerning their actuation frequencies, for integration in microfluidic devices. Their layout, actuation frequency and behavior were compared for mixing two fluids inside a microfluidic reaction chamber. Numerical simulations and experimental tests showed flow vortices generation and a significant mixing time reduction for both materials: above 90% for PZT and above 80% for beta-PVDF. It was also observed an increase of the temperature on the transducers surface, which is advantageous for applications in which heating is necessary. The results showed agreement between simulations and experimental tests which can be useful for predicting new materials behavior for improving microfluidic devices mixing.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 9