Characterization of Iron-Matrix Composites Reinforced by In Situ TiC and Ex Situ WC Fabricated by Casting

• Tipo: Artigo em Revista Científica Internacional
• Data: 2021

Autores

Aida B. Moreira (Autor) FEUP; Laura M. M. Ribeiro (Autor) FEUP; Pedro Lacerda (Autor) Outra; Manuel F. Vieira (Autor) FEUP

Revista

Título: Metals

Vol. 11 Nº 6

Páginas: 1-12

Editora: MDPI

Indexação

ISI Web of Knowledge - 0 Citações

Scopus - 0 Citações

Outras Informações

ID Authenticus: P-00T-Z12

DOI: 10.3390/met11060862

Abstract (EN): In this study, the effect of microstructural characteristics on the mechanical properties of high-chromium white cast iron-matrix composites reinforced by in situ TiC and ex situ WC was investigated. To this end, two different powder mixtures (Ti + Al + graphite and WC + Fe) were compressed to produce green compacts that were inserted into the mold, before casting. The microstructure of the resulting composites and the base metal was characterized using optical microscopy (OM) and scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS). The microstructural analysis revealed a sound bonding between the composite zone and the base metal. The reinforcement with WC particles showed a homogeneous distribution of the carbide particles, unlike the reinforcement with TiC particles. The mechanical properties of the reinforcements were evaluated using hardness and ball-cratering micro-abrasion tests. The results showed that both reinforcements increase the hardness and wear performance of the base material, which was the best performance achieved by the reinforcement with WC particles.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 12