Three-dimensional modeling of PEMFC with contaminated anode fuel

• Tipo: Artigo em Revista Científica Internacional
• Data: 2018

Autores

Mohammadmahdi Abdollahzadehsangroudi (Autor) Outra; Paulo Ribeirinha (Autor) FEUP; Marta Boaventura (Autor) FEUP; Adélio Mendes (Autor) FEUP

Revista

Título: Energy

Vol. 152

Páginas: 939-959

ISSN: 0360-5442

Editora: Elsevier

Indexação

ISI Web of Knowledge - 24 Citações

ISI Web of Science

Scopus

Projetos Associados

LEPABE - Laboratório de Engenharia de Processos, Ambiente, Biotecnologia e Energia

LEPABE-2-ECO-INNOVATION - LEPABE-2-ECO-INNOVATION

FluidCELL - Advanced m-CHP fuel CELL system based on a novel bio-ethanol Fluidized bed membrane reformer

Outras Informações

ID Authenticus: P-00R-AB2

DOI: 10.1016/j.energy.2018.03.162

Abstract (EN): A novel transient multi-dimensional non-isothermal multiphase model for simulating PEMFC was developed. A multiphase agglomerate catalyst model was considered for the cathode catalyst layer, while in the anode catalyst layer the effect of CO and CO2 presence was taken into consideration assuming two families of catalysts, Pt/C and Pt-Ru. The model predictions were compared to experimental data found in the literature and from an in-house PEMFC. The model was able to capture accurately the steady polarization curves of PEMFCs fed with hydrogen containing different amounts of CO and CO2. Moreover, the corresponding transient voltage was accurately simulated. The results indicated that even low CO concentration in the anode fuel, leads to a considerable degradation of the fuel cell output current density. Among the tested gas diffusion layers, the ones with the highest thickness showed worst performance of the PEMFC. Results showed, that high tortuosity and low contact angle (hydrophobicity) of the gas diffusion layer, decreases the performance of the PEMFC.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 21