Experimental studies of the effect of cathode diffusion layer properties on a passive direct methanol fuel cell power output

• Type: Article in International Scientific Journal
• Date: 2019

Authors

Braz, BA (Author) Other; V. B. Oliveira (Author) FEUP; A.M.F.R. Pinto (Author) FEUP

Journal

Title: International Journal of Hydrogen Energy

Vol. 44

ISSN: 0360-3199

Publisher: Elsevier

Indexing

ISI Web of Knowledge - 0 Citations

Scopus - 7 Citations

Other information

Authenticus ID: P-00Q-FGT

DOI: 10.1016/j.ijhydene.2019.03.162

Abstract (EN): A great challenge in a passive direct methanol fuel cell (pDMFC) is how to reduce both methanol and water crossover, from the anode to the cathode side, without significant losses on its power output. Different approaches including improving the membrane and modifying the cell structure and materials have been proposed in the last years. In this work, an experimental study was carried out to evaluate the effect of the cathode diffusion layer (CDL) properties on the power output of a pDMFC. Towards a cost reduction, lower catalyst loadings were used on both anode and cathode electrodes. Since the main goal was the optimization of a pDMFC using the materials commercially available, different carbon-fibber materials were employed as CDL. The experimental results were analysed based on the polarization curves and electrochemical impedance spectroscopy measurements with innovative electric equivalent circuit allowing the identification of the different losses, including the activation resistance of the parasitic cathode methanol oxidation. A maximum power density of 3.0 mW/cm(2) was obtained using carbon cloth with a lower thickness as CDL and a methanol concentration of 5 M.

Language: English

Type (Professor's evaluation): Scientific

No. of pages: 10