The evolution of morphology and kinetics during the foaming process of aluminium foams

• Type: Article in International Scientific Journal
• Date: 2002

Authors

duarte, i (Author) Other; mascarenhas, j (Author) Other; ferreira, a (Author) FEUP; banhart, j (Author) Other

Journal

Title: Advanced Materials Forum I

Vol. 37

Pages: 96-101

Publisher: Trans Tech Publications

Indexing

ISI Web of Knowledge - 8 Citations

Scopus - 7 Citations

Scientific classification

FOS: Engineering and technology > Materials engineering

Other information

Authenticus ID: P-000-QP1

DOI: 10.4028/www.scientific.net/kem.230-232.96

Abstract (EN): Aluminium foams were produced by powder metallurgical method that was developed and patented by Fraunhofer-Institute for Advanced Materials (in Bremen) and it is known as Fraunhofer-Process. The process consists of mixing aluminium and foaming agent powders and subsequent pressing them (hot extrusion or hot pressing) to a dense semi-finished product, as called the foamable precursor material. This precursor material is then heated up to its melting point inside a "laser expandometer", which allow both control of the expansion (in volume) and temperature, throughout the entire process. The expansion of foamable precursor material and its temperature, which characterise the kinetics, were monitored during the entire foaming process by means of a laser sensor and a thermocouple, respectively. The evolution of morphology (shape and size of the cellular pores) and microstructure during the foaming process was discussed. The scope of this work is to discuss the phenomena, which occur during the foam formation metal, i.e. how the foam emerges from the liquid, how it changes with time and what mechanisms are responsible for its formation.

Language: English

Type (Professor's evaluation): Scientific

No. of pages: 6