NETmix technology as ozone gas injection system: Assessment of the gas-liquid mass transfer

• Tipo: Artigo em Revista Científica Internacional
• Data: 2023

Autores

Pituco, MM (Autor) Outra; Marrocos, PH (Autor) Outra; Santos, RJ (Autor) Outra; Madalena M. Dias (Autor) FEUP; Lopes, JCB (Autor) Outra; Moreira, FC (Autor) Outra; Vitor Vilar (Autor) FEUP

Revista

Título: Chemical Engineering and Processing - Process Intensification

Vol. 194

ISSN: 0255-2701

Editora: Elsevier

Indexação

ISI Web of Knowledge - 1 Citação

Scopus - 1 Citação

Projetos Associados

LA LSRE-LCM - Financiamento Plurianual 2020-2023 para a Unidade LA LSRE-LCM Laboratório de Processos de Separação e Reacção - Laboratório de Catálise e Materiais

Outras Informações

ID Authenticus: P-00Z-53D

DOI: 10.1016/j.cep.2023.109566

Abstract (EN): This work proposes an innovative high-intensity mixer based on the NETmix technology to promote the contact between ozone (O3) gas and water. The NETmix consists of a network of unit cells comprising mixing cylindrical chambers interconnected by prismatic channels. Its exclusive geometry generates successive contacting and splitting of flows, boosting mass transfer rates and rapidly developing an O3-enriched liquid stream. The gas -liquid mass transfer performance of NETmix was evaluated by measuring the volumetric mass transfer coefficient (kLa), standard oxygen transfer rate, standard oxygen transfer efficiency, and energy expenditure parameters. A co-current continuous flow condition was used to introduce a gas stream (consisting of either O3/oxygen (O2) or synthetic air) and a liquid stream (water), whereby it was varied the direction of co-current fluid flow (downwards or upwards) and the injected gas (QG) and liquid (QL) flowrates. The downward flow of gas and liquid streams enhanced the mass transfer phenomenon by at least 43 %. Moreover, the kLa values increased with QL and QG, reaching 2.46 s-1 at a low specific power consumption (25 kW m-3). The NETmix showed kLa values at least one order of magnitude larger than conventional contactors, maintaining a high-energy utilization efficiency (up to 19.4 kgO3 kWh-1).

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 13