Repairing wood beams under bending using carbon-epoxy composites

• Tipo: Artigo em Revista Científica Internacional
• Data: 2012

Autores

Dourado, N (Autor) Outra; Pereira, FAM (Autor) Outra; de Moura, MFSF (Autor) FEUP; Morais, JJL (Autor) Outra

Revista

Título: Engineering Structures

Vol. 34

Páginas: 342-350

ISSN: 0141-0296

Editora: Elsevier

Indexação

ISI Web of Knowledge - 20 Citações

ISI Web of Science

Scopus - 28 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia civil

Outras Informações

ID Authenticus: P-002-HCE

DOI: 10.1016/j.engstruct.2011.09.001

Abstract (EN): Repair of wood damaged beams under bending using carbon-epoxy composites has been studied in this work. The influence of patch thickness and adhesive filleting was analyzed experimentally and numerically. The main goal was to assess the effect of these parameters on the ultimate load and failure type. Numerical analyses considering a mixed-mode cohesive damage model were performed in order to better understand the physical phenomena which explain the observed behavior. The main conclusion is that repairing leads to a remarkable gain on the bearing capacity of the damaged beam. Additionally, it was observed that a slight increase on the ultimate load can be obtained by diminishing the patch thickness. However, adhesive filleting did not induce a clear increase on the load bearing capacity, which was explained by the failure mode observed in this case.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 9