Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > Strength Improvement of Adhesively-Bonded Joints Using a Reverse-Bent Geometry

Strength Improvement of Adhesively-Bonded Joints Using a Reverse-Bent Geometry

Título
Strength Improvement of Adhesively-Bonded Joints Using a Reverse-Bent Geometry
Tipo
Artigo em Revista Científica Internacional
Ano
2011
Autores
Campilho, RDSG
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Ver página do Authenticus Sem ORCID
Pinto, AMG
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Ver página do Authenticus Sem ORCID
Banea, MD
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Silva, RF
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
da Silva, LFM
(Autor)
FEUP
Revista
Vol. 25
Páginas: 2351-2368
ISSN: 0169-4243
Editora: Taylor & Francis
Classificação Científica
FOS: Ciências da engenharia e tecnologias > Engenharia química
Outras Informações
ID Authenticus: P-002-X3G
Abstract (EN): Adhesive bonding of components has become more efficient in recent years due to the developments in adhesive technology, which has resulted in higher peel and shear strengths, and also in allowable ductility up to failure. As a result, fastening and riveting methods are being progressively replaced by adhesive bonding, allowing a big step towards stronger and lighter unions. However, single-lap bonded joints still generate substantial peel and shear stress concentrations at the overlap edges that can be harmful to the structure, especially when using brittle adhesives that do not allow plasticization in these regions. In this work, a numerical and experimental study is performed to evaluate the feasibility of bending the adherends at the ends of the overlap for the strength improvement of single-lap aluminium joints bonded with a brittle and a ductile adhesive. Different combinations of joint eccentricity were tested, including absence of eccentricity, allowing the optimization of the joint. A Finite Element stress and failure analysis in ABAQUS (R) was also carried out to provide a better understanding of the bent configuration. Results showed a major advantage of using the proposed modification for the brittle adhesive, but the joints with the ductile adhesive were not much affected by the bending technique. (C) Koninklijke Brill NV, Leiden, 2011
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Contacto: raulcampilho@gmail.com
Nº de páginas: 18
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Untitled (2008)
Outra Publicação em Revista Científica Internacional
Lucas F M da Silva
Untitled (2009)
Outra Publicação em Revista Científica Internacional
Lucas F M da Silva; Andreas Oechsner
Untitled (2011)
Outra Publicação em Revista Científica Internacional
Lucas F M da Silva; Andreas Oechsner
The role of sucrose in amino polymers synthesized by the strongly acid process (2013)
Artigo em Revista Científica Internacional
Nuno A. Costa; João Pereira; João Ferra; Paulo Cruz; J. Agostinho Moreira; Jorge Martins; Fernão D. Magalhães; Adélio Mendes; Luísa H. Carvalho
The behaviour of single lap joints under bending loading (2013)
Artigo em Revista Científica Internacional
Karachalios, EF; Adams, RD; Lucas F M da Silva

Ver todas (50)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Medicina Dentária da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z  I Livro de Visitas
Página gerada em: 2025-06-23 às 14:51:27 | Política de Utilização Aceitável | Política de Proteção de Dados Pessoais | Denúncias