Printed fractal monopole antenna array for WLAN

• Tipo: Artigo em Livro de Atas de Conferência Internacional
• Data: 2010

Autores

Q. Luo (Autor) Outra; H. M. Salgado (Autor) FEUP; J. R. Pereira (Autor) Outra

Ata de Conferência Internacional

Título: Final Program and Book of Abstracts - iWAT 2010: 2010 International Workshop on Antenna Technology: Small Antennas, Innovative Structures and Materials

2010 International Workshop on Antenna Technology: Small Antennas, Innovative Structures and Materials, iWAT2010

Lisbon, 1 March 2010 through 3 March 2010

Indexação

Scopus - 5 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia electrotécnica, electrónica e informática

Outras Informações

ID Authenticus: P-007-TJV

DOI: 10.1109/iwat.2010.5464876

Abstract (EN): This paper presents the design of a single feed multiband printed monopole antenna array using the 2nd generation of the Minkowski fractal geometry. The multiband operation is achieved by a suitable chosen of the size and iteration of the fractal geometry, which is optimized using the EM simulation tool Ansoft HFSS. During this work, it is found that adding a rectangular stub on the ground plane, the impedance match of the antenna can be improved with little influence on the original resonant frequencies. This finding has been confirmed by both simulation and measurement results. Meanwhile, the antenna array on a PDA size substrate was also designed and fabricated. The experimental results show that it can operate from 2.32 to 2.49 and from 5.1 to 5.88 GHz, which covers the required bands for IEEE 802.11a/b/g (2.41-2.48 GHz, 5.15-5.35 GHz and 5.725-5.875 GHz) applications. Measurements indicate that the maximum gain of this printed monopole array can reach 2.3 dBi at lower band and 5.6 dBi at upper band. The simulation results show that the radiation efficiency of this antenna array is 86% at 2.4 GHz, 82% at 5.2 GHz and 89% at 5.8 GHz. ©2010 IEEE.

Idioma: Inglês

Tipo (Avaliação Docente): Científica