Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > Modelling damage in half-hole pin bearing cross-ply and angle-ply composite laminates

Modelling damage in half-hole pin bearing cross-ply and angle-ply composite laminates

Título
Modelling damage in half-hole pin bearing cross-ply and angle-ply composite laminates
Tipo
Artigo em Revista Científica Internacional
Ano
2022
Autores
Zhuang, FJ
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Tavares, RP
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Camanho, PP
(Autor)
FEUP
Chen, PH
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Título: Composite StructuresImportada do Authenticus Pesquisar Publicações da Revista
Vol. 300
ISSN: 0263-8223
Editora: Elsevier
Indexação
Publicação em ISI Web of Knowledge ISI Web of Knowledge - 0 Citações
Publicação em Scopus Scopus - 0 Citações
Outras Informações
ID Authenticus: P-00X-3Y7
Abstract (EN): This paper presents the development and validation of a mesoscale numerical model to predict the bearing failure of composite laminates reinforced by unidirectional continuous fibers, focusing on specimens that show a significant non-linear response prior to failure. Half-hole pin bearing tests were carried out with multiple instrumentation for the comprehensive characterization of the failure process. Three-dimensional finite element models were used for the simulation of plastic deformation and damage of the cross- and angle-ply specimens using fiber-aligned mesh for the composite plies. To consider the non-linear material behavior prior to crack propagation, the constitutive model proposed includes a bi-linear elastoplastic model to represent the non-linear response under longitudinal shear. For the prediction of the peak and post-peak behavior, 3D invariant-based failure criteria and mechanism-based continuum damage models were used for intralaminar damage, together with a discrete cohesive zone model for delamination. Thorough analyses and comparisons of the experimental and numerical results show a good correlation of the bearing strengths and overall deformation, as well as good agreement in terms of damage size and damage shape. Relevant limitations include difficulties in predicting the post-peak plateau stresses and the loading displacements in some configurations, setting the stage for additional future research.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 17
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Smart composites and composite structures In honour of the 70th anniversary of Professor Carlos Alberto Mota Soares (2016)
Outra Publicação em Revista Científica Internacional
Benjeddou, A; Araujo, AL; Carrera, E; Reddy, JN; António Torres Marques; Mota Soares, CMM
Simplified stress analysis of functionally graded single-lap joints subjected to combined thermal and mechanical loads (2018)
Outra Publicação em Revista Científica Internacional
Paroissien, E; da Silva, LFM; Lachaud, F
Reinforcement of CFRP single lap joints using metal laminates (2019)
Outra Publicação em Revista Científica Internacional
Morgado, MA; Ricardo Carbas; Marques, EAS; da Silva, LFM
Multifunctional Material Systems: A state-of-the-art review (2016)
Outra Publicação em Revista Científica Internacional
Ferreira, ADBL; Novoa, PRO; António Torres Marques

Ver todas (197)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Medicina Dentária da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-07-30 às 04:23:21 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico