Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > Engineering of Nanostructured Carbon Catalyst Supports for the Continuous Reduction of Bromate in Drinking Water

Engineering of Nanostructured Carbon Catalyst Supports for the Continuous Reduction of Bromate in Drinking Water

Título
Engineering of Nanostructured Carbon Catalyst Supports for the Continuous Reduction of Bromate in Drinking Water
Tipo
Artigo em Revista Científica Internacional
Ano
2022
Autores
da Costa, JMCB
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Barbosa, JRM
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Restivo, J
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Carla Orge
(Autor)
FEUP
Nogueira, A
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Castro Silva, S
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Manuel Fernando R Pereira
(Autor)
FEUP
Revista
A Revista está pendente de validação pelos Serviços Administrativos.
Vol. 8
Página Final: 21
ISSN: 2311-5629
Indexação
Publicação em ISI Web of Knowledge ISI Web of Knowledge - 0 Citações
Publicação em Scopus Scopus - 0 Citações
Outras Informações
ID Authenticus: P-00W-AKT
Abstract (EN): Recent works in the development of nanostructured catalysts for bromate reduction in drinking water under hydrogen have highlighted the importance of the properties of the metallic phase support in their overall performance. Since most works in catalyst development are carried out in powder form, there is an overlooked gap in the correlation between catalyst support properties and performance in typical continuous applications such as fixed bed reactors. In this work, it is shown that the mechanical modification of commercially available carbon nanotubes, one of the most promising supports, can significantly enhance the activity of the catalytic system when tested in a stirred tank reactor, but upon transition to a fixed bed reactor, the formation of preferential pathways for the liquid flow and high pressure drops were observed. This effect could be minimized by the addition of an inert filler to increase the bed porosity; however, the improvement in catalytic performance when compared with the as-received support material was not retained. The operation of the continuous catalytic system was then optimized using a 1 wt.% Pd catalyst supported on the as-received carbon nanotubes. Effluent and hydrogen flow rates as well as catalyst loadings were systematically optimized to find an efficient set of parameters for the operation of the system, regarding its catalytic performance, capacity to treat large effluent flows, and minimization of catalyst and hydrogen requirements. Experiments carried out in the presence of distilled water as a reaction medium demonstrate that bromate can be efficiently removed from the liquid phase, whereas when using a real water matrix, a tendency for the deactivation of the catalyst over time was more apparent throughout 200 flow passages over the catalytic bed, which was mostly attributed to the competitive adsorption of inorganic matter on the catalyst active centers, or the formation of mineral deposits blocking access to the catalyst.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 18
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Towards Controlled Degradation of Poly(lactic) Acid in Technical Applications (2021)
Outra Publicação em Revista Científica Internacional
Teixeira, S; Eblagon, K.M.; Miranda, F; Manuel Fernando R Pereira; Figueiredo, JL
Tuning CNT Properties for Metal-Free Environmental Catalytic Applications (2016)
Artigo em Revista Científica Internacional
Raquel P. Rocha; O.S.G.P. Soares; José Luis Figueiredo; Manuel Fernando R Pereira
Preparation of Few-Layer Graphene/Carbon Nanotube Hybrids Using Oxide Spinel Catalysts (2019)
Artigo em Revista Científica Internacional
Bruno F. Machado; Revathi R. Bacsa; Camila Rivera-Cárcamo; Philippe Serp
Mechanothermal Approach for N-, S-, P-, and B-Doping of Carbon Nanotubes: Methodology and Catalytic Performance in Wet Air Oxidation (2019)
Artigo em Revista Científica Internacional
Olívia Salomé G. P. Soares; Raquel P. Rocha; José J. M. Órfão; Manuel Fernando R. Pereira; José L. Figueiredo
Insights into the Electrocatalytic Activity of Fe,N-Glucose/Carbon Nanotube Hybrids for the Oxygen Reduction Reaction (2024)
Artigo em Revista Científica Internacional
Rafael Morais; Natalya Rey Raap; José Luis Figueiredo; Manuel Fernando R Pereira

Ver todas (6)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Medicina Dentária da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-09-28 às 16:56:53 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico