Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > Elasto-plastic analysis of plates by the element free Galerkin method

Elasto-plastic analysis of plates by the element free Galerkin method

Título
Elasto-plastic analysis of plates by the element free Galerkin method
Tipo
Artigo em Revista Científica Internacional
Ano
2006
Revista
Vol. 23
Páginas: 525-551
ISSN: 0264-4401
Editora: Emerald
Indexação
Classificação Científica
FOS: Ciências da engenharia e tecnologias > Outras ciências da engenharia e tecnologias
CORDIS: Ciências Tecnológicas > Engenharia
Outras Informações
ID Authenticus: P-004-PJS
Abstract (EN): Purpose - The aim of this paper is to extend the Element Free Galerkin method (EFGM) in order to perform the elasto-plastic analysis of isotropic plates. Design/methodology/approach - The EFGM shape-function construction is briefly presented. The Newton-Raphson method and the elasto-plastic algorithm adapted to the EFGM, are described. Several plate bending non-linear material problems are solved and the obtained solutions are compared with available finite element method (FEM) solutions. Findings - The paper finds that the developed EFGM approach is a good alternative to the FEM for the solution of non-linear problems, once the obtained results with the EFGM show a high similarity with the obtained FEM results. Research limitations/implications - Comparing the FEM and the EFGM there are some drawbacks for the EFGM. The computational cost of the EFGM is higher, the imposition of the essential boundary conditions is more complex and there is a high sensitivity of the method in what concerns the choice of the influence domain and the choice of the weight function. Practical implications - The knowledge that the EFGM formulation can be treated almost as the FEM formulation once the EFGM parameters are calibrated and optimized. Originality/value - The extension of the EFGM to the elasto-plastic analysis of isotropic plates.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Contacto: ldinis@fe.up.pt
Nº de páginas: 27
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

The Non-Linear Analysis of 3D Beams Using a Radial Interpolation Meshless Method (2009)
Resumo de Comunicação em Conferência Internacional
Lúcia M. J. S. Dinis; R.M. Natal Jorge; Jorge Belinha
The Radial Natural Neighbour Interpolators Extended to Elastoplasticity (2008)
Capítulo ou Parte de Livro
Lúcia Maria Dinis; Renato Natal Jorge; Jorge Belinha
The dynamic analysis of thin structures using a radial interpolator meshless method (2008)
Capítulo ou Parte de Livro
Lúcia Maria Dinis; Renato Natal Jorge; Jorge Belinha
O Método Livre de Elementos de Galerkin na Análise Não-Linear de Estruturas Anisotrópicas. (2007)
Artigo em Revista Científica Nacional
Jorge Belinha; Lúcia M. J. S. Dinis

Ver todas (151)

Das mesmas áreas científicas

Testing of Ventilation Terminals – Final Report (2000)
Relatório Técnico
Silva, A.; Oliveira, A.; Afonso, C.F.A.; Varga, S.
Sistemas de Avaliação de Qualidade OE+EUR-ACE - Fundamentos, Critérios, Procedimentos (2009)
Relatório Técnico
Feyo de Azevedo, S.; A. Salgado de Barros
Regulamentar a Engenharia; No Caminho da Acreditação (2004)
Relatório Técnico
Sebastião Feyo de Azevedo
Reconstrução e caracterização de estruturas anatómicas exteriores usando visão activa (2005)
Relatório Técnico
Teresa Cristina de Sousa Azevedo; João Manuel Ribeiro Silva Tavares ; Mário Augusto Pires Vaz

Ver todas (84)

Da mesma revista

Guest editorial (2013)
Outra Publicação em Revista Científica Internacional
Barros, H; Faria, R; Ferreira, C
Computational methods in multi-scale, multi-uncertainty and multi-physics problems (2021)
Outra Publicação em Revista Científica Internacional
F.M. Andrade Pires; Li, CF
3D printing and development of computational models of biodegradable meshes for pelvic organ prolapse (2024)
Artigo em Revista Científica Internacional
Vaz, MFRR; Silva, ME; Parente, M; Brandao, S; Fernandes, AA
The Semiloof Shell, Plate and Beam Elements - New Computer Versions. Part I - Elements Formulations (1988)
Artigo em Revista Científica Internacional
R. A. F. Martins; C. Oliveira
The Semiloof Shell, Plate and Beam - New Computer Versions. Part II - Elements Programming (1988)
Artigo em Revista Científica Internacional
R. A. F. Martins; C. Oliveira

Ver todas (43)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Medicina Dentária da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-07-24 às 06:31:12 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico