Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > Interrogation of a Suspended-Core Fabry-Perot Temperature Sensor Through a Dual Wavelength Raman Fiber Laser

Interrogation of a Suspended-Core Fabry-Perot Temperature Sensor Through a Dual Wavelength Raman Fiber Laser

Título
Interrogation of a Suspended-Core Fabry-Perot Temperature Sensor Through a Dual Wavelength Raman Fiber Laser
Tipo
Artigo em Revista Científica Internacional
Ano
2010
Autores
Pinto, AMR
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Frazao, O
(Autor)
FCUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Santos, JL
(Autor)
FCUP
Lopez Amo, M
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Kobelke, J
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Schuster, K
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Vol. 28 21
Páginas: 3149-3155
ISSN: 0733-8724
Indexação
Classificação Científica
FOS: Ciências da engenharia e tecnologias > Engenharia electrotécnica, electrónica e informática
Outras Informações
ID Authenticus: P-003-1GP
Abstract (EN): sThe interrogation of a Fabry-Perot cavity through a dual wavelength Raman fiber laser is reported. The proposed sensing system is based on the use of a dual wavelength Raman fiber laser to generate two quadrature phase-shifted signals that allow the recovery of the temperature change sensed by the Fabry-Perot interferometric cavity. The dual wavelength Raman fiber laser is based on fiber Bragg gratings combined with a distributed mirror. The Fabry-Perot cavity is fabricated by splicing a short length of a suspended-core microstructured fiber to a single mode fiber. The use of this sensing system allows a passive and accurate interrogation of the temperature, while taking advantage of the Rayleigh scattering growth as a distributed mirror in the laser.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

SPECIAL ISSUE ON INTERNATIONAL CONFERENCE ON OPTICAL FIBER SENSORS Introduction (2015)
Outra Publicação em Revista Científica Internacional
Miguel Lopez Higuera, JM; Jones, J; Lopez Amo, M; Santos, JL
Tomographic stress profiling of arc-induced long-period fiber gratings (2005)
Artigo em Revista Científica Internacional
Durr, F; Rego, G; Marques, PVS; Semjonov, SL; Dianov, EM; Limberger, HG; Salathe, RP
Theoretical and Experimental Results of High-Birefringent Fiber Loop Mirror With an Output Port Probe (2012)
Artigo em Revista Científica Internacional
Ricardo Manuel Silva; Azam Layeghi; Mohammad Ismail Zibaii; Hamid Latifi; Jose Luis Santos; Orlando Frazao
System capacity for millimeter-wave radio-over-fiber distribution employing an optically supported PLL (1999)
Artigo em Revista Científica Internacional
R. A Griffin; Henrique Manuel de Castro Faria Salgado; P. Lane; J. O'Reilly
Strong Birefringence Tuning of Optical Waveguides With Femtosecond Laser Irradiation of Bulk Fused Silica and Single Mode Fibers (2013)
Artigo em Revista Científica Internacional
Fernandes, LA; Grenier, JR; Marques, PVS; Stewart Aitchison, J; Herman, PR

Ver todas (31)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Medicina Dentária da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-07-31 às 04:02:29 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico