Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > Permeable coverings

Permeable coverings

Título
Permeable coverings
Tipo
Artigo em Revista Científica Internacional
Ano
2012
Autores
Orosa, JA
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Armando C. Oliveira
(Autor)
FEUP
Indexação
Publicação em Scopus Scopus - 0 Citações
Outras Informações
ID Authenticus: P-00H-04Y
Abstract (EN): In the past few years, permeable external coverings and impermeable internal coverings of plastic emulsion paints have not been recommended by architects and engineers. This is related to the fact that partial vapour pressure inside the building, which is higher than outdoors, may drive water vapour through walls and condense in some zones damaging the walls. To prevent this effect, impermeable internal and external coverings are employed. However, the permeable covering effect can be employed to control indoor environments as a passive method, reducing energy consumption. Concrete walls with permeable coverings may have a similar effect to wooden structures. This effect has not been analysed in real indoor environments and, hence, the need for research in this area. This investigation must consider the periods when these materials are more effective, through building simulation for long periods of time. Moisture storage capacity of building materials, in real case studies, revealed a minimum of a 2-week working period after a change in weather conditions. As observed earlier, the effect of hygroscopic materials to control indoor environments can reduce the HVAC system operating time and, hence, reduce or even replace (in extreme cases) conventional energy consumption. This chapter shows results of the effect of permeable coverings on indoor environments. Specifically, the methodology to define their working periods in real buildings is defined. Later, their effects or energy consumption are analysed, as well as thermal comfort and related health effects. Building characteristics such as construction, ventilation rate and working period are described, as well as measuring processes and equipment.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

Foreword (2012)
Outra Publicação em Revista Científica Internacional
Orosa, JA; Armando C. Oliveira
Thermal Comfort and Indoor Air Quality (2011)
Capítulo ou Parte de Livro
Orosa, JA; Armando C. Oliveira
Passive Methods (2011)
Capítulo ou Parte de Livro
Orosa, JA; Armando C. Oliveira
Future Research Work (2011)
Capítulo ou Parte de Livro
Orosa, JA; Armando C. Oliveira
Thermal comfort conditions in ships (2010)
Artigo em Revista Científica Internacional
Orosa, JA; Iradi, G; Armando C. Oliveira

Ver todas (19)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Medicina Dentária da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-07-23 às 23:05:23 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico