Compression behaviour of clay bricks prisms, wallets and walls - Coating influence

• Tipo: Artigo em Revista Científica Internacional
• Data: 2019

Autores

Ana Sofia Guimarães (Autor) FEUP; João M. P. Q. Delgado (Autor) FEUP; António Azevedo (Autor) Outra; Fernando Artur Silva (Autor) Outra; Romildo Oliveira (Autor) Outra

Revista

Título: Revista de la Construccion

Vol. 18 Nº 1

Páginas: 123-133

ISSN: 0717-7925

Editora: PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE

Indexação

ISI Web of Knowledge - 0 Citações

ISI Web of Science

Scopus - 2 Citações

Outras Informações

ID Authenticus: P-00Q-N3H

DOI: 10.7764/RDLC.18.1.123

Abstract (EN): This work describes an experimental study carried out on running bond 195 red clay prisms, of two and three ceramic blocks, with and without cement mortar coating and some samples reinforced with mesh, subjected to axial compression in order to enhance the capacity of masonry. The prisms were subjected to compressive loading and all of them had deformation control on each face with a deflectometer, to obtain information about the structural behaviour of the prisms. The experimental results indicate an increase both in the compressive load capacity of the coated prisms and in those that use coatings based on reinforced mortar, not complying with the specifications of conventional structural mortar. The load ratios of prism/wallettes and prisms with two blocks/prisms with three blocks were satisfactory.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 11