Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > Alternative treatments for footwear industry liquid effluents part 1 - classical approach

Alternative treatments for footwear industry liquid effluents part 1 - classical approach

Título
Alternative treatments for footwear industry liquid effluents part 1 - classical approach
Tipo
Artigo em Revista Científica Internacional
Ano
2002
Autores
M. J. Ferreira
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
M. F. Almeida
(Autor)
FEUP
S. Pinho
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
A. Neves
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Vol. 86 3
Páginas: 96-100
ISSN: 0144-0322
Indexação
Classificação Científica
CORDIS: Ciências Tecnológicas
FOS: Ciências da engenharia e tecnologias
Outras Informações
ID Authenticus: P-000-PHX
Abstract (EN): The footwear industry generates small volumes of non-biodegradable liquid effluents from finishing operations which have a high organic load, mainly due to pigments, organic acids and organic solvents. In consequence, these effluents must be treated to accomplish regulatory requirements before discharge. One of the treatment alternatives is coagulation/flocculation, a well-known treatment for removing fine particles and colloids. Tests carried out using lime, aluminum sulphate, ferric chloride and ferric sulphate as coagulants gave chemical oxygen demand (COD) and 5-day biochemical oxygen demand (BOD5) removals over 80-90 %. However, despite this efficiency, some of the effluent characteristics are still higher than those imposed for discharge to surface waters, land or sewage systems. A polishing step using activated carbon adsorption is then required to permit the discharge to sewage systems, but the quantities of adsorbent required casts some doubt on the feasibility of the process.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 5
Documentos
Não foi encontrado nenhum documento associado à publicação com acesso permitido.
Publicações Relacionadas

Da mesma revista

Using ashes from incineration of chromium sulphate tanned leather scrap part 2: Tanning liquors, additives in footwear adhesives and fillers in mortars (2001)
Artigo em Revista Científica Internacional
Ferreira, MJ; Xara, E; Manuel Fonseca Almeida; Barla, M; Ferrer, J
Using Ashes from incineration of chromium sulphate tanned leather scrap. Part II: Tanning Liquors, Additives in footwear adhesives and fillers in mortars (2001)
Artigo em Revista Científica Internacional
M. J. Ferreira; E. Xará; M. F. Almeida; M. Barla; J. Ferrer
Using ashes from incineration of chromium sulphate tanned leather scrap - Part 1: Characterization of ashes and chromium extraction (2000)
Artigo em Revista Científica Internacional
M. J. Ferreira; E. Xará; Manuel Fonseca Almeida; M. Barla; J. Ferrer
Recycling in goat skin lime unhairing (2011)
Artigo em Revista Científica Internacional
Crispim, A; Sampaio, A; Nídia de Sá Caetano
Recycling in Goat Skin Lime Unhairing (2011)
Artigo em Revista Científica Internacional
Crispm, A; Sampaio, A; Nídia de Sá Caetano

Ver todas (16)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Medicina Dentária da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-07-31 às 01:39:52 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico