Compact Printed C-shaped Monopole Antenna with Chip Inductor

• Tipo: Artigo em Livro de Atas de Conferência Internacional
• Data: 2011

Autores

Luo, Q (Autor) Outra; H. M. Salgado (Autor) FEUP; Pereira, JR (Autor) Outra

Ata de Conferência Internacional

Título: 2011 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (APSURSI)

Páginas: 156-159

IEEE International Symposium on Antennas and Propagation (APSURSI)/USNC/URSI National Radio Science Meeting

Spokane, WA, JUL 03-08, 2011

Indexação

ISI Web of Knowledge - 4 Citações

Scopus - 8 Citações

Outras Informações

ID Authenticus: P-002-ZWE

DOI: 10.1109/aps.2011.5996665

Abstract (EN): This paper presents one compact printed monopole antenna with one chip inductor embedded on the radiation elements. By introducing the chip inductor, the resonant frequency of the original antenna can be decreased by more than 37% while there is no significant influence on its radiation characteristics including radiation efficiency and antenna gain. Meanwhile, after adding the chip inductor, the higher mode of the original antenna can also be brought down to a lower frequency, which makes the proposed antenna resonate at the dual frequency band and simultaneously have a compact size. This antenna has a C-shaped geometry and its parameters including the location of the chip inductor are optimized by doing parametrical studies in Ansoft HFSS. The measurement and simulation results show that the proposed C-shaped monopole antenna can operate at 2.55-2.65GHz and 5.1-5.3GHz with peak gain of 2.2 and 4.7dB, respectively. Moreover, according to the simulation results, the radiation efficiency of this antenna at both bands is around 90%.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 4