Publicações com os mesmos autores da publicação The through-the-thickness measurement of residual stress in a thick welded steel compact tension specimen by the contour method

Agrupar Por: Ordenação:

Resumo de Comunicação em Conferência Internacional

Analysis of the crack growth behavior in a double cantilever beam adhesive fracture test using digital image processing techniques

Valentin Josef Richter-Trummer (Autor) (FEUP); Eduardo André de Sousa Marques (Autor) (FEUP); Filipe José Palhares Chaves (Autor) (FEUP); João Manuel Ribeiro da Silva Tavares (Autor) (FEUP); Lucas Filipe Martins da Silva (Autor) (FEUP); Paulo Manuel Salgado Tavares de Castro (Autor) (FEUP)

2009

Classificação Científica Documentos

Nome do Ficheiro	Descrição	Tamanho
Analysis of the crack growth behavior in a double cantilever beam adhesive fracture test using digital image processing techniques		59.08 KB

Capítulo ou Parte de Livro

Lightweight stiffened panels fabricated using emerging fabrication technologies: fatigue behaviour

P.M.G.P. Moreira (Autor) (Outra); V. Richter-Trummer (Autor) (Outra); Paulo Tavares de Castro (Autor) (FEUP)

2012

Fatigue behaviour of FS, LB and MIG welds of AA6061-T6 and AA6082-T6

Pedro Moreira (Autor) (FEUP); Valentin Richter-Trummer (Autor) (FEUP); Paulo Tavares De Castro (Autor) (FEUP)

2008

Classificação Científica

Damage tolerance of aircraft panels taking into account residual stress

V. Richter-Trummer (Autor) (Outra); P.M.G.P. Moreira (Autor) (Outra); Paulo Tavares de Castro (Autor) (FEUP)

2012

Artigo em Revista Científica Internacional

Welding monitoring using FBG sensors

Paulo Tavares de Castro (Autor) (FEUP); V. Richter-Trummer (Autor) (FEUP); S.M.O. Tavares (Autor) (FEUP); D.F.C. Peixoto (Autor) (FEUP); S.O. Silva (Autor) (Outra); O. Frazão (Autor) (Outra); P.M.G.P. Moreira (Autor) (FEUP)

2010

Methodology for prediction of distortion of workpieces manufactured by high speed machining based on an accurate through-the-thickness residual stress determination

Paulo Tavares de Castro (Autor) (FEUP); V. Richter-Trummer (Autor) (FEUP); D. Koch (Autor) (Outra); A. Witte (Autor) (Outra); J.F. dos Santos (Autor) (Outra)

2013

Indexação

Mechanical characterization of friction stir welds of two dissimilar aluminium alloys of the 6xxx series

Pedro Moreira (Autor) (FEUP); T Santos (Autor) (Outra); Sérgio Tavares (Autor) (FEUP); Valentin Richter-Trummer (Autor) (FEUP); P Vilaça (Autor) (Outra); Paulo Tavares De Castro (Autor) (FEUP)

2008

Classificação Científica

Mechanical and metallurgical characterization of friction stir welding joints of AA6061-T6 with AA6082-T6

2009

Classificação Científica Indexação

Friction stir welding of T-joints with dissimilar aluminium alloys: mechanical joint characterisation

Paulo Tavares de Castro (Autor) (FEUP); S.M.O. Tavares (Autor) (FEUP); R.A.S. Castro (Autor) (FEUP); V. Richter-Trummer (Autor) (FEUP); P. Vilaça (Autor) (Outra); P.M.G.P. Moreira (Autor) (FEUP)

2010

Indexação

Friction stir welding of aluminium alloys and damage tolerance of integral monolithic structures

Valentin Richter-Trummer (Autor) (FEUP); Sérgio Tavares (Autor) (FEUP); Pedro Moreira (Autor) (FEUP); Paulo Tavares De Castro (Autor) (FEUP)

2008

Classificação Científica Indexação

Fatigue crack striation spacing for welded and base material CT steel specimens

Paulo Tavares de Castro (Autor) (FEUP); V. Richter-Trummer (Autor) (Outra); R. M.C. Miranda (Autor) (FEUP); C. Albuquerque (Autor) (Outra)

2013

Assessment of residual stress of welded structural steel plates with or without post weld rolling using the contour method and neutron diffraction

Paulo Tavares de Castro (Autor) (FEUP); D.F.O. Braga (Autor) (FEUP); H.E. Coules (Autor) (Outra); T. Pirling (Autor) (Outra); V. Richter-Trummer (Autor) (FEUP); P. Colegrove (Autor) (Outra)

2013

Indexação