Soil - Geosynthetic inclined plane shear behavior: Influence of soil moisture content and geosynthetic type

• Tipo: Artigo em Revista Científica Internacional
• Data: 2014

Autores

Maria de Lurdes Lopes (Autor) FEUP; Fernanda Ferreira (Autor) FEUP; José Ricardo Carneiro (Autor) FEUP; Castorina Silva Vieira (Autor) FEUP

Revista

Título: International Journal of Geotechnical Engineering

Vol. 8 Nº 3

Páginas: 335-342

ISSN: 1938-6362

Editora: Taylor & Francis

Indexação

Scopus - 24 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias

CORDIS: Ciências Tecnológicas

Projetos Associados

RCD-VALOR - Aplicação sustentável de Resíduos de Construção e Demolição (RCD) em estruturas reforçadas com geossintéticos

Outras Informações

ID Authenticus: P-00G-1EW

DOI: 10.1179/1939787914y.0000000047

Abstract (EN): This paper deals with the inclined plane shear on three different geosynthetics (a geocomposite (GC), a non-woven geotextile (GTX), and an extruded geogrid (GGR)) with a residual soil from granite. Soil and geosynthetic properties, test equipment, and procedures are described. The influence of soil moisture content and geosynthetic type on soil - geosynthetic interaction behavior is discussed by analyzing the results of the inclined plane shear tests. The main conclusions that can be outlined from the present study are the following: (1) the influence of soil moisture content was relevant for the soil - GTX and soil - GC interfaces. Indeed, the resistance of those interfaces decreased with the increase of soil moisture content. No significant differences were observed between the behavior of those geosynthetics; (2) the influence of soil moisture content on the behavior of the soil - GGR interface was less evident. A slight decrease on the interface friction angle was only observed for the highest soil moisture content; (3) the dry soil - GGR interface resistance was lower than that observed for the other two geosynthetics due to the relevance of soil - soil friction at the GGR apertures, to the high percentage of fines of the soil used in the research (D50=1·00 mm), and to the smoother solid lateral surface of the extruded GGR when compared with the surface of the GTX or GC. © 2014 W. S. Maney & Son Ltd.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 9