Modeling the electrocoagulation process for the treatment of contaminated water

• Tipo: Artigo em Revista Científica Internacional
• Data: 2019

Autores

Nuno S. Graça (Autor) Outra; Ana M. Ribeiro (Autor) FEUP; Alírio E. Rodrigues (Autor) FEUP

Revista

Título: Chemical Engineering Science

Vol. 197

Páginas: 379-385

ISSN: 0009-2509

Editora: Elsevier

Indexação

ISI Web of Knowledge - 1 Citação

Scopus - 18 Citações

Projetos Associados

HyWATER - Treatment of contaminated drinking water using an hybrid low cost process

LSRE-LCM - Laboratório de Processos de Separação e Reação - Laboratório de Catálise e Materiais

Outras Informações

ID Authenticus: P-00S-W9G

DOI: 10.1016/j.ces.2018.12.038

Abstract (EN): The study of the electro-dissolution of aluminum electrodes during the electrocoagulation process is important for understanding the mechanisms involved in the process. This study involved the experimental determination of both total and dissolved aluminum concentrations during the electrocoagulation processes operation. The total aluminum concentration was fitted with the Faraday's equation and was obtained 1.6 of current efficiency, indicating a super-faradaic behavior of the electrochemical process at the given operating conditions. Additionally, a mathematical model was developed considering the electrochemical dissolution of the Al anode, water electrolysis, hydrolysis of dissolved Al and water dissociation reaction involved in the electrocoagulation process. The simulated results showed a good prediction of the evolution of both concentration of dissolved aluminum and pH during the electrocoagulation process operation. The model was also employed to simulate the removal of arsenic from water by electrocoagulation showing a good prediction of the experimental results at the operating conditions considered. © 2019

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 7