Waste materials for activated carbon preparation and its use in aqueous-phase treatment: A review

• Tipo: Outra Publicação em Revista Científica Internacional
• Data: 2007

Autores

Joana Dias (Autor) FEUP; Conceição Alvim Ferraz (Autor) FEUP; Manuel Fonseca Almeida (Autor) FEUP; Rivera Utrilla, J (Autor) Outra; Sanchez Polo, M (Autor) Outra

Revista

Título: Journal of Environmental Management

Vol. 85

Páginas: 833-846

ISSN: 0301-4797

Editora: Elsevier

Indexação

ISI Web of Knowledge - 528 Citações

Scopus - 709 Citações

Outras Informações

ID Authenticus: P-004-61Y

DOI: 10.1016/j.jenvman.2007.07.031

Abstract (EN): Commercial activated carbon is a preferred adsorbent for the removal of micropollutants from the aqueous phase; however, its widespread use is restricted due to high associated costs. To decrease treatment costs, attempts have been made to find inexpensive alternative activated carbon (AC) precursors, such as waste materials. Some reviews report the use of waste materials for the preparation of AC; however, these studies are restricted to either type of wastes, preparation procedures, or specific aqueous-phase applications. The present work reviews and evaluates literature dedicated both to the preparation of AC by recycling different types of waste materials and also to its application in various aqueous-phase treatments. It is clear that conventional (from agriculture and wood industry) and nonconventional (from municipal and industrial activities) wastes can be used to prepare AC, that can be applied in various aqueous treatment processes, namely to remove organic pollutants, dyes, volatile organic compounds, and heavy metals. Moreover, high surface areas can be obtained using either physical or chemical activation; however, combined treatments might enhance the surface properties of the adsorbent, therefore increasing its adsorption capacity. It is evident from the revision made that AC prepared from both conventional and non-conventional wastes might effectively compete with the commercial ones. This happens mostly when the activation procedures are optimized considering both the raw material used to produce the carbons and the contaminants to be removed.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 14